How To Measure Your Room
It’s impossible to know the cost of a new floor without knowing how much of it you need. Unless you’re a maths whizz, it can be pretty daunting to start measuring your room, so we have a simple method you can use.
If your room is a rectangle, this is as simple as measuring the length and width of your room and multiplying them together. Therefore if your room is 6 metres long and 3 metres wide, the area will be 18 metres square because 6 x 3 = 18.
If your room isn’t rectangular, we recommend splitting it into rectangular sections. Multiply the width and length of each rectangle together to find the area. Then, add the areas of each rectangle together to find the total area. If you have an L shaped room, for example, this can be split into 2 rectangles.
And if you’ve got a complicated room, this method still works. Simply split the room into as many rectangles as needed. Multiply the length and width of each rectangle to find the areas, then add them all together to find the total area. (Remember to jot down the measurements as you go along!)
Important tip: it’s standard to add an extra 5% on to your area to allow for the usual wastage that occurs during installation. To calculate this, you’ll need to multiply the total area by 1.05. However, parquet and tiled floors where the installation starts in the middle of the room require 7-10%wastage as it’s likely you’ll have to cut more boards than with a regular, strait-lay design.
Learn about our other floors
Search our Advice Centre