ACCESSORIES FOR: Karndean Knight Tile Rustic Ash KP53 Vinyl Flooring
The following accessories are recommended for use with this floor and some may be required to complete your installation.
If you are unsure what you need or would like further advice please call us on 0800 999 8100 and we will be more than happy to help.
Natura Solid Wood Unfinished Skirting 2.4m
Solid pine skirting that can be finished with a lacquer, oil, stain or left as it is.
18mm (t) x 120mm (w) x 2.4m (l)
Karndean Universal Adhesive
Resin-free, wet-bed high temperature dispersion adhesive which is easy to apply and maintains good open time and grab.
Karndean Acrylic Adhesive
Karndean should be wet bonded when used with this adhesive so we recommend working section by section.
Karndean Skim Coat 5kg
A rapid drying floor finishing compound - designed to be used over wood and cementitious bases.
Karndean Epoxy Adhesive 4 litre
Best used in wet areas such as shower rooms or bathrooms where water is likely to lay on a regular basis.
Karndean High Temperature Adhesive
Best used where the room temperature is likely to vary such as conservatories or where underfloor heating is installed.
Karndean Pressure Sensitive Adhesive
Bonds only when pressure is applied to it suitable for most installations where there is not excessive moisture or temperature changes.
Karndean American Oak Design Strip for Knight Tile
To complete the look of your Karndean floor, add a Karndean American Oak Design Strip. Place these between tiles to create a natural grouting effect or to enhance the design of your floor. For use with Karndean Knight Tile.
25 Strips of 2mm (t) x 3mm (w) x 915mm (l)
25 Strips of 2mm (t) x 5mm (w) x 915mm (l)
25 Strips of 2mm (t) x 10mm (w) x 915mm (l)
10 Strips of 2mm (t) x 30mm (w) x 915mm (l)
10 Strips of 2mm (t) x 76mm (w) x 915mm (l)
Karndean Aurora Design Strip for Knight Tile
To complete the look of your Karndean floor, add a Karndean Aurora Design Strip. Place these between tiles to create a natural grouting effect or to enhance the design of your floor. For use with Karndean Knight Tile.
25 Strips of 2mm (t) x 3mm (w) x 915mm (l)
25 Strips of 2mm (t) x 5mm (w) x 915mm (l)
25 Strips of 2mm (t) x 10mm (w) x 915mm (l)
10 Strips of 2mm (t) x 30mm (w) x 915mm (l)
10 Strips of 2mm (t) x 76mm (w) x 915mm (l)
Karndean Beech Design Strip for Knight Tile
To complete the look of your Karndean floor, add a Karndean Beech Design Strip. Place these between tiles to create a natural grouting effect or to enhance the design of your floor. For use with Karndean Knight Tile.
25 Strips of 2mm (t) x 3mm (w) x 915mm (l)
25 Strips of 2mm (t) x 5mm (w) x 915mm (l)
25 Strips of 2mm (t) x 10mm (w) x 915mm (l)
10 Strips of 2mm (t) x 30mm (w) x 915mm (l)
10 Strips of 2mm (t) x 76mm (w) x 915mm (l)
Karndean Bray Oak Design Strip for Knight Tile
To complete the look of your Karndean floor, add a Karndean Bray Oak Design Strip. Place these between tiles to create a natural grouting effect or to enhance the design of your floor. For use with Karndean Knight Tile.
25 Strips of 2mm (t) x 3mm (w) x 915mm (l)
25 Strips of 2mm (t) x 5mm (w) x 915mm (l)
25 Strips of 2mm (t) x 10mm (w) x 915mm (l)
10 Strips of 2mm (t) x 30mm (w) x 915mm (l)
10 Strips of 2mm (t) x 76mm (w) x 915mm (l)
Karndean Cedar Design Strip for Knight Tile
To complete the look of your Karndean floor, add a Karndean Cedar Design Strip. Place these between tiles to create a natural grouting effect or to enhance the design of your floor. For use with Karndean Knight Tile.
25 Strips of 2mm (t) x 3mm (w) x 915mm (l)
25 Strips of 2mm (t) x 5mm (w) x 915mm (l)
25 Strips of 2mm (t) x 10mm (w) x 915mm (l)
10 Strips of 2mm (t) x 30mm (w) x 915mm (l)
10 Strips of 2mm (t) x 76mm (w) x 915mm (l)
Karndean DS01 Design Strip for Knight Tile
To complete the look of your Karndean floor, add a Karndean DS01 Design Strip. Place these between tiles to create a natural grouting effect or to enhance the design of your floor. For use with Karndean Knight Tile.
25 Strips of 2mm (t) x 3mm (w) x 915mm (l)
25 Strips of 2mm (t) x 5mm (w) x 915mm (l)
25 Strips of 2mm (t) x 10mm (w) x 915mm (l)
Karndean DS02 Design Strip for Knight Tile
To complete the look of your Karndean floor, add a Karndean DS02 Design Strip. Place these between tiles to create a natural grouting effect or to enhance the design of your floor. For use with Karndean Knight Tile.
25 Strips of 2mm (t) x 3mm (w) x 915mm (l)
25 Strips of 2mm (t) x 5mm (w) x 915mm (l)
25 Strips of 2mm (t) x 10mm (w) x 915mm (l)
Karndean DS03 Design Strip for Knight Tile
To complete the look of your Karndean floor, add a Karndean DS03 Design Strip. Place these between tiles to create a natural grouting effect or to enhance the design of your floor. For use with Karndean Knight Tile.
25 Strips of 2mm (t) x 3mm (w) x 915mm (l)
25 Strips of 2mm (t) x 5mm (w) x 915mm (l)
25 Strips of 2mm (t) x 10mm (w) x 915mm (l)
Karndean DS04 Design Strip for Knight Tile
To complete the look of your Karndean floor, add a Karndean DS04 Design Strip. Place these between tiles to create a natural grouting effect or to enhance the design of your floor. For use with Karndean Knight Tile.
25 Strips of 2mm (t) x 3mm (w) x 915mm (l)
25 Strips of 2mm (t) x 5mm (w) x 915mm (l)
25 Strips of 2mm (t) x 10mm (w) x 915mm (l)
Karndean DS05 Design Strip for Knight Tile
To complete the look of your Karndean floor, add a Karndean DS05 Design Strip. Place these between tiles to create a natural grouting effect or to enhance the design of your floor. For use with Karndean Knight Tile.
25 Strips of 2mm (t) x 3mm (w) x 915mm (l)
25 Strips of 2mm (t) x 5mm (w) x 915mm (l)
25 Strips of 2mm (t) x 10mm (w) x 915mm (l)
Karndean DS06 Design Strip for Knight Tile
To complete the look of your Karndean floor, add a Karndean DS06 Design Strip. Place these between tiles to create a natural grouting effect or to enhance the design of your floor. For use with Karndean Knight Tile.
25 Strips of 2mm (t) x 3mm (w) x 915mm (l)
25 Strips of 2mm (t) x 5mm (w) x 915mm (l)
25 Strips of 2mm (t) x 10mm (w) x 915mm (l)
Karndean DS07 Design Strip for Knight Tile
To complete the look of your Karndean floor, add a Karndean DS07 Design Strip. Place these between tiles to create a natural grouting effect or to enhance the design of your floor. For use with Karndean Knight Tile.
25 Strips of 2mm (t) x 3mm (w) x 915mm (l)
25 Strips of 2mm (t) x 5mm (w) x 915mm (l)
25 Strips of 2mm (t) x 10mm (w) x 915mm (l)
Karndean DS08 Design Strip for Knight Tile
To complete the look of your Karndean floor, add a Karndean DS08 Design Strip. Place these between tiles to create a natural grouting effect or to enhance the design of your floor. For use with Karndean Knight Tile.
25 Strips of 2mm (t) x 3mm (w) x 915mm (l)
25 Strips of 2mm (t) x 5mm (w) x 915mm (l)
25 Strips of 2mm (t) x 10mm (w) x 915mm (l)
Karndean DS09 Design Strip for Knight Tile
To complete the look of your Karndean floor, add a Karndean DS09 Design Strip. Place these between tiles to create a natural grouting effect or to enhance the design of your floor. For use with Karndean Knight Tile.
25 Strips of 2mm (t) x 3mm (w) x 915mm (l)
25 Strips of 2mm (t) x 5mm (w) x 915mm (l)
25 Strips of 2mm (t) x 10mm (w) x 915mm (l)
Karndean DS10 Design Strip for Knight Tile
To complete the look of your Karndean floor, add a Karndean DS10 Design Strip. Place these between tiles to create a natural grouting effect or to enhance the design of your floor. For use with Karndean Knight Tile.
25 Strips of 2mm (t) x 3mm (w) x 915mm (l)
25 Strips of 2mm (t) x 5mm (w) x 915mm (l)
25 Strips of 2mm (t) x 10mm (w) x 915mm (l)
Karndean DS13 Design Strip for Knight Tile
To complete the look of your Karndean floor, add a Karndean DS13 Design Strip. Place these between tiles to create a natural grouting effect or to enhance the design of your floor. For use with Karndean Knight Tile.
25 Strips of 2mm (t) x 3mm (w) x 915mm (l)
25 Strips of 2mm (t) x 5mm (w) x 915mm (l)
25 Strips of 2mm (t) x 10mm (w) x 915mm (l)
Karndean DS14 Design Strip for Knight Tile
To complete the look of your Karndean floor, add a Karndean DS14 Design Strip. Place these between tiles to create a natural grouting effect or to enhance the design of your floor. For use with Karndean Knight Tile.
25 Strips of 2mm (t) x 3mm (w) x 915mm (l)
25 Strips of 2mm (t) x 5mm (w) x 915mm (l)
25 Strips of 2mm (t) x 10mm (w) x 915mm (l)
Karndean DS15 Design Strip for Knight Tile
To complete the look of your Karndean floor, add a Karndean DS15 Design Strip. Place these between tiles to create a natural grouting effect or to enhance the design of your floor. For use with Karndean Knight Tile.
25 Strips of 2mm (t) x 3mm (w) x 915mm (l)
25 Strips of 2mm (t) x 5mm (w) x 915mm (l)
25 Strips of 2mm (t) x 10mm (w) x 915mm (l)
Karndean DS16 Design Strip for Knight Tile
To complete the look of your Karndean floor, add a Karndean DS16 Design Strip. Place these between tiles to create a natural grouting effect or to enhance the design of your floor. For use with Karndean Knight Tile.
25 Strips of 2mm (t) x 3mm (w) x 915mm (l)
25 Strips of 2mm (t) x 5mm (w) x 915mm (l)
25 Strips of 2mm (t) x 10mm (w) x 915mm (l)
Karndean DS17 Design Strip for Knight Tile
To complete the look of your Karndean floor, add a Karndean DS17 Design Strip. Place these between tiles to create a natural grouting effect or to enhance the design of your floor. For use with Karndean Knight Tile.
25 Strips of 2mm (t) x 3mm (w) x 915mm (l)
25 Strips of 2mm (t) x 5mm (w) x 915mm (l)
25 Strips of 2mm (t) x 10mm (w) x 915mm (l)
Karndean DS18 Design Strip for Knight Tile
To complete the look of your Karndean floor, add a Karndean DS18 Design Strip. Place these between tiles to create a natural grouting effect or to enhance the design of your floor. For use with Karndean Knight Tile.
25 Strips of 2mm (t) x 3mm (w) x 915mm (l)
25 Strips of 2mm (t) x 5mm (w) x 915mm (l)
25 Strips of 2mm (t) x 10mm (w) x 915mm (l)
Karndean DS19 Design Strip for Knight Tile
To complete the look of your Karndean floor, add a Karndean DS19 Design Strip. Place these between tiles to create a natural grouting effect or to enhance the design of your floor. For use with Karndean Knight Tile.
25 Strips of 2mm (t) x 3mm (w) x 915mm (l)
25 Strips of 2mm (t) x 5mm (w) x 915mm (l)
25 Strips of 2mm (t) x 10mm (w) x 915mm (l)
Karndean Neopolitan Brick Design Strip for Knight Tile
To complete the look of your Karndean floor, add a Karndean Neopolitan Brick Design Strip. Place these between tiles to create a natural grouting effect or to enhance the design of your floor. For use with Karndean Knight Tile.
25 Strips of 2mm (t) x 10mm (w) x 915mm (l)
10 Strips of 2mm (t) x 30mm (w) x 915mm (l)
10 Strips of 2mm (t) x 76mm (w) x 915mm (l)
Karndean Onyx Design Strip for Knight Tile
To complete the look of your Karndean floor, add a Karndean Onyx Design Strip. Place these between tiles to create a natural grouting effect or to enhance the design of your floor. For use with Karndean Knight Tile.
25 Strips of 2mm (t) x 3mm (w) x 915mm (l)
25 Strips of 2mm (t) x 5mm (w) x 915mm (l)
25 Strips of 2mm (t) x 10mm (w) x 915mm (l)
10 Strips of 2mm (t) x 30mm (w) x 915mm (l)
10 Strips of 2mm (t) x 76mm (w) x 915mm (l)
Karndean Orkney Design Strip for Knight Tile
To complete the look of your Karndean floor, add a Karndean Orkney Design Strip. Place these between tiles to create a natural grouting effect or to enhance the design of your floor. For use with Karndean Knight Tile.
25 Strips of 2mm (t) x 3mm (w) x 915mm (l)
25 Strips of 2mm (t) x 5mm (w) x 915mm (l)
25 Strips of 2mm (t) x 10mm (w) x 915mm (l)
10 Strips of 2mm (t) x 30mm (w) x 915mm (l)
10 Strips of 2mm (t) x 76mm (w) x 915mm (l)
Karndean Rosewood Design Strip for Knight Tile
To complete the look of your Karndean floor, add a Karndean Rosewood Design Strip. Place these between tiles to create a natural grouting effect or to enhance the design of your floor. For use with Karndean Knight Tile.
25 Strips of 2mm (t) x 3mm (w) x 915mm (l)
25 Strips of 2mm (t) x 5mm (w) x 915mm (l)
25 Strips of 2mm (t) x 10mm (w) x 915mm (l)
10 Strips of 2mm (t) x 30mm (w) x 915mm (l)
10 Strips of 2mm (t) x 76mm (w) x 915mm (l)
Karndean Sahara Design Strip for Knight Tile
To complete the look of your Karndean floor, add a Karndean Sahara Design Strip. Place these between tiles to create a natural grouting effect or to enhance the design of your floor. For use with Karndean Knight Tile.
25 Strips of 2mm (t) x 3mm (w) x 915mm (l)
25 Strips of 2mm (t) x 5mm (w) x 915mm (l)
25 Strips of 2mm (t) x 10mm (w) x 915mm (l)
10 Strips of 2mm (t) x 30mm (w) x 915mm (l)
10 Strips of 2mm (t) x 76mm (w) x 915mm (l)
Karndean Sandstone Design Strip for Knight Tile
To complete the look of your Karndean floor, add a Karndean Sandstone Design Strip. Place these between tiles to create a natural grouting effect or to enhance the design of your floor. For use with Karndean Knight Tile.
25 Strips of 2mm (t) x 3mm (w) x 915mm (l)
25 Strips of 2mm (t) x 5mm (w) x 915mm (l)
25 Strips of 2mm (t) x 10mm (w) x 915mm (l)
10 Strips of 2mm (t) x 30mm (w) x 915mm (l)
10 Strips of 2mm (t) x 76mm (w) x 915mm (l)
Karndean Sienna Design Strip for Knight Tile
To complete the look of your Karndean floor, add a Karndean Sienna Design Strip. Place these between tiles to create a natural grouting effect or to enhance the design of your floor. For use with Karndean Knight Tile.
25 Strips of 2mm (t) x 3mm (w) x 915mm (l)
25 Strips of 2mm (t) x 5mm (w) x 915mm (l)
25 Strips of 2mm (t) x 10mm (w) x 915mm (l)
10 Strips of 2mm (t) x 30mm (w) x 915mm (l)
10 Strips of 2mm (t) x 76mm (w) x 915mm (l)
Karndean Soapstone Design Strip for Knight Tile
To complete the look of your Karndean floor, add a Karndean Soapstone Design Strip. Place these between tiles to create a natural grouting effect or to enhance the design of your floor. For use with Karndean Knight Tile.
25 Strips of 2mm (t) x 3mm (w) x 915mm (l)
25 Strips of 2mm (t) x 5mm (w) x 915mm (l)
25 Strips of 2mm (t) x 10mm (w) x 915mm (l)
10 Strips of 2mm (t) x 30mm (w) x 915mm (l)
10 Strips of 2mm (t) x 76mm (w) x 915mm (l)
Karndean Sycamore Design Strip for Knight Tile
To complete the look of your Karndean floor, add a Karndean Sycamore Design Strip. Place these between tiles to create a natural grouting effect or to enhance the design of your floor. For use with Karndean Knight Tile.
25 Strips of 2mm (t) x 3mm (w) x 915mm (l)
25 Strips of 2mm (t) x 5mm (w) x 915mm (l)
25 Strips of 2mm (t) x 10mm (w) x 915mm (l)
10 Strips of 2mm (t) x 30mm (w) x 915mm (l)
10 Strips of 2mm (t) x 76mm (w) x 915mm (l)
Karndean Walnut Design Strip for Knight Tile
To complete the look of your Karndean floor, add a Karndean Walnut Design Strip. Place these between tiles to create a natural grouting effect or to enhance the design of your floor. For use with Karndean Knight Tile.
25 Strips of 2mm (t) x 3mm (w) x 915mm (l)
25 Strips of 2mm (t) x 5mm (w) x 915mm (l)
25 Strips of 2mm (t) x 10mm (w) x 915mm (l)
10 Strips of 2mm (t) x 30mm (w) x 915mm (l)
10 Strips of 2mm (t) x 76mm (w) x 915mm (l)
Karndean A2 Adhesive Spreader
Easy to use spreader for diy applications.
Karndean Routine Cleaner 750ml
Day to day cleaner to deal with stains and spillages.
Covers approx 150m2 (concentrated)
Karndean Refresh Floor Protector 750ml
This provides a satin finish to your Karndean floor, as well as an extra layer of protection against wear.
Karndean Basic Stripper 750ml
This is used to strip back the floor protection when it starts to look worn.
Karndean Refresh Floor Protector 2 litre
This provides a satin finish to your Karndean floor, as well as an extra layer of protection against wear.
Karndean Routine Cleaner 2 litre
Day to day cleaner to deal with stains and spillages.
Covers approx 125m2 (concentrated)
Karndean Floor Care Kit
Contains a protector, a remover and floor cleaner, along with non abrasive nylon pad, felt pads and maintenance guide.
Karndean Basic Stripper 2 litre
This is used to strip back the Dim Glow Protection when it starts to look worn.
Coir Entrance Matting
A simple way to trap dirt and grit before it gets onto your floor.
Follow Us