Category Sitemap

• Amtico 6kg Universal 2 part Adhesive
  Amtico Universal 2 part adhesive is best used in wet areas such as shower rooms or bathrooms where water is likely to lay on a regular basis. This adhesive is quite resistant to water and therefore will not lose grip of the tiles over time.
  
• Amtico Easygrout
  An innovative new product from Amtico. A ready mixed grout to be used between tiles instead of stripping, further enhancing the floor.
  
• Amtico Floor Cleaner
  Amtico recommend the use of their cleaners to maintain the floor. 1lt bottle covers approx 50m2
  
• Amtico Floor Dressing
  Amtico recommend the use of their floor dressing to preserve the just-laid look of your Amtico floor. 1lt bottle covers approx 50m2
  
• Amtico Floor Dressing Remover
  Amtico recommend the use of their floor dressing remover when maintaining your floor. 1lt bottle covers approx 50m2
  
• Amtico High Temperature Adhesive 15 litre
  Amtico high temperature adhesive is best used where the room temperature is likely to vary such as conservatories or where underfloor heating is installed.
  
• Amtico High Temperature Adhesive 5 litre
  Amtico high temperature adhesive is best used where the room temperature is likely to vary such as conservatories or where underfloor heating is installed.
  
• Amtico Pressure Sensitive Adhesive 14kg
  Amtico pressure sensitive adhesive is suitable for most installations where there is not excessive moisture or temperature changes.
  
• Amtico Pressure Sensitive Adhesive 3kg
  Amtico pressure sensitive adhesive is suitable for most installations where there is not excessive moisture or temperature changes.
  
• Amtico Pressure Sensitive Adhesive 6kg
  Amtico pressure sensitive adhesive is suitable for most installations where there is not excessive moisture or temperature changes.
  
• Amtico Solvent Free Adhesive 15 litre
  Amtico solvent free adhesive is suitable for most installations where there is not excessive moisture or temperature changes.
  
• Amtico Solvent Free Adhesive 2.5 litre
  Amtico solvent free adhesive is suitable for most installations where there is not excessive moisture or temperature changes.
  
• Amtico Solvent Free Adhesive 5 litre
  Amtico solvent free adhesive is suitable for most installations where there is not excessive moisture or temperature changes.
  
• Amtico Starter Pack
  Amtico starter pack includes cleaner felt pads and a care booklet. Use regularly to maintain the appearance of a just-laid floor.
  
• Amtico Tackifier 14kg
  A water-based, solvent-free tackifier with very low emissions, specially suitable for installing Amtico to a wide range of subfloors.
  
• Amtico Tackifier 6kg
  A water-based, solvent-free tackifier with very low emissions, specially suitable for installing Amtico to a wide range of subfloors.
  
• Balls F3 Adhesive 5 litre
  Coverage: 15m2 per 5lt tin. This is adhesive is for sticking Natural Carpet to Durafit Underlay.
  
• Balls F40 Adhesive 5 litre
  Coverage: approx 20m2 per 5lt tin. This high tack adhesive is for sticking Durafit Underlay to your subfloor.
  
• Chrome Metal Door Stop
  This Chrome Metal Door Stop With 2 rubber rings comes with fixings to fit this stop to your floor, to stop doors from hitting the wall.
  
• Coir Entrance Matting
  Coir matting is a cost effective way of maintaining your floor. It can be laid as a door mat on top of your new floor to collect grit and other debris. It can be rolled up and put away in the summer months if preferred.
  
• Cush n Wood Underlay
  Is an acoustic sound-proofing, high-density foam underlay and is therefore ideally suited for 1st floor use or above. It has a moisture barrier, which should not be used as a replacement for a DPM.
  
• Durafit 500 Carpet Underlay
  Durafit underlay is a crumb rubber underlay only suitable for use with natural carpets. The carpet has to be stuck to the underlay using F Balls F3 adhesive. Offers 25dB reduction in sound.
  
• Easy Clean Dual Purpose Mop
  EasyClean Dual Purpose Mop can be used on any type of floor covering – wood, laminate, tiles, linoleum etc. EasyClean enables a thorough wash without any risk of damage. It will prevent excessive water on wood and laminate floors, which can cause damage through joint opening. The cotton fibres remove dust and loose dirt while tough sponge strips when wet will give a thorough clean. The kit comes with a machine washable cloth, telescopic handle and a quick release mop holder. Using figure of 8 movements the microfibre pad will easily pick up grease, dust and dirt. Spray cleaner onto floor and wipe dry with mop.
  
• Easy Shine Wood and Laminate Floor Cleaner
  Easyshine Wood and Laminate Floor Cleaner enables you to clean laminates and finished wood floors safely, with no build up of polish. It dries to a sparkling shine. Before applying, sweep or vacuum floor. Turn nozzle onto the spray position and spray sparingly directly onto the floor. Wipe clean with a clean moist mop/cloth. No need to rinse! To ensure compatibility with your floor, first test a small inconspicuous area.
  
• Fibreboard Underlay
  Natura Fibreboard underlay has acoustic properties, good thermal insulation and offers a good level base for your laminate flooring.
  
• Floor Installation Kit
  An installation kit with wedges, a mallet, a knocking block, one roll of Antiplas Tape (covers 15m²) and a pull bar. To be used with Wood, Laminate, or Spacia Easyfit flooring. This is essential if you are installing your first floor.
  
• Flooring Installation Kit
  This kit includes 10mm spacers a pulling bar and a knocking block. This is essential if you are installing your first floor.
  
• Intec Stain Protection
  We recommend Intec stain protection on all natural carpets. Intec stain protection provides a protective layer preventing absortion of stains and dirt. This solvent free stain protector is sprayed onto the carpet before despatch as a result please allow for an extra 2-3 days for delivery.
  
• Janser Adhesive B2 Trowel for use with L16 Woodbond
  A trowel blade and handle with notches sized at 2mm x 6mm. Comes complete with a 4" wooden handle.
  
• Junckers Clips - 250 per box
  Required to hold together any Junckers floor that is laid as a floating floor. This floor requires 13 clips for 2 strip and 17 clips for wideboard per m2. This box will cover 19m2 and 14.7m2 respectively.
  
• Junckers Clips - 65 per box
  Required to hold together any Junckers floor that is laid as a floating floor. This floor requires 13 clips for 2 strip and 17 clips for wideboard per m2. This box will cover 5m2 and 3.8m2 respectively.
  
• Junckers Header Joint Adhesive
  This adhesive is required for Junckers header joints. Junckers flooring must be glued at the ends as well as being clipped together. Covers approximately 35 - 40m2
  
• Junckers Profelt Underlay
  Profelt is a resilient, step sound absorbing underlay mat for floating floors. It consists of a polythene membrane laminated to a synthetic fibre mat in such a way as to allow a 100 mm overlap of polythene on one side with a built-in tape. Profelt is recommended for use with all Junckers Solid Hardwood floors.
  
• Kahrs Floor Cleaner 1 ltr
  A concentrated form of cleaner to be mixed with water and applied with a mop. An effective and environmental friendly product specially formulated for cleaning all Kährs floors.
  
• Kahrs Jarrah stained Oak Edge Trim 2.4m
  Made from solid wood to match Jarrah Sydney floors. An edge trim is to be used where a wooden floor meets a hearth, patiodoor, front door, back door, or to butt up to a step. It can also be used to create an inset door mat recess. They are prefinished with a satin lacquer. Kahrs and Natura trims may not match each other exactly so we suggest purchasing the same manufacturer for adjoining trims. We recommend this product be installed with Laybond Gripfill Adhesive.
  
• Kahrs Jarrah stained Oak Ramp Trim 2.4m
  Made from solid wood to match Jarrah Sydney floors a ramp trim is to be used where a wooden floor reduces down to the level that your new wooden flooring is installed against, e.g. vinyl, floor boards. They are prefinished with a satin lacquer. Kahrs and Natura trims may not match each other exactly so we suggest purchasing the same manufacturer for adjoining trims. We recommend this product be installed with Laybond Gripfill Adhesive.
  
• Kahrs Jarrah stained Oak Threshold Trim 2.4m
  Made from solid wood to match Jarrah Sydney floors. A threshold trim is to be used where a wooden floor meets a floor of the supportable same or similar height, e.g. wood or tiles. These are prefinished with a satin lacquer. Kahrs and Natura trims may not match each other exactly so we suggest purchasing the same manufacturer for adjoining trims. We recommend this product be installed with Laybond Gripfill Adhesive.
  
• Kahrs Lacquer Refresher 1 litre
  Used to bring luster back to the finish of a dull satin or matt lacquered floor. The floor can be recoated in the future if needed after this product is used. Should be applied with Kährs mop.
  
• Kahrs Locking Tool Woodloc 5S
  The Kahrs Locking Tool for Woodloc 5S floors is used to engage the locking pin at the end of the boards. The pin holds the next board in place end to end, and can also be engaged by laying the next row of boards. The locking tool can be used to disengage the locking pin when there is a need to remove the floor. Kahrs have produced the majority of their floors to use this new improved locking joint, but please check when ordering if it is required for your floor.
  
• Kahrs merbau stained oak Edge Trim 2.4m
  Made from merbau stained oak to match your chosen floor. An edge trim is to be used where a wooden floor meets a hearth, patiodoor, front door, back door, or to butt up to a step. It can also be used to create an inset door mat recess. They are prefinished with a satin lacquer. Kahrs and Natura trims may not match each other exactly so we suggest purchasing the same manufacturer for adjoining trims. We recommend this product be installed with Laybond Gripfill Adhesive.
  
• Kahrs merbau stained oak Ramp Trim 2.4m
  Made from merbau stained oak to match your chosen floor a ramp trim is to be used where a wooden floor reduces down to the level that your new wooden flooring is installed against, e.g. vinyl, floor boards. They are prefinished with a satin lacquer. Kahrs and Natura trims may not match each other exactly so we suggest purchasing the same manufacturer for adjoining trims. We recommend this product be installed with Laybond Gripfill Adhesive.
  
• Kahrs Oil 0.75 litre
  Used for recoating a Kährs floor with an oiled finish. The finish has a high resistance to wear and common household chemicals.
  
• Kahrs Oil Refresher 1 litre
  Used to remove dirt and/or stains from your nature oiled or UV oiled floor. Product can be applied with a Kährs mop. Covers 30m2.
  
• Kahrs Prefinished Beech Skirting 2.4m
  Pre-finished with a satin lacquer and is made from prime grade timber. We recommend this product be installed with Laybond Gripfill Adhesive. The image shows the profile of Kahrs Oak skirting, with a swatch of beech to indicate the approximate colour of beech skirting.
  
• Kahrs Prefinished Cherry Skirting 2.4m
  Pre-finished with a satin lacquer and is made from prime grade timber. We recommend this product be installed with Laybond Gripfill Adhesive. The image shows the profile of Kahrs Oak skirting, with a swatch of cherry to indicate the approximate colour of cherry skirting.
  
• Kahrs Prefinished Maple Skirting 2.4m
  Pre-finished with a satin lacquer and is made from prime grade timber. We recommend this product be installed with Laybond Gripfill Adhesive. The image shows the profile of Kahrs Oak skirting, with a swatch of maple to indicate the approximate colour of maple skirting.
  
• Kahrs Prefinished Oak Skirting 2.4m
  A very elegant skirting board for use with any oak wood floor. Pre-finished with a satin lacquer and is made from prime grade timber. We recommend this product be installed with Laybond Gripfill Adhesive.
  
• Kahrs Prefinished Walnut Skirting 2.4m
  Pre-finished with a satin lacquer and is made from prime grade timber. We recommend this product be installed with Laybond Gripfill Adhesive. The image shows the profile of Kahrs Oak skirting, with a swatch of Walnut to indicate the approximate colour of Walnut skirting.
  
• Kahrs Remover 1 litre
  For preparing a Kährs floor for recoating. Purpose is to take off dirt/grease and/or Kährs Lacquer Refresher. Can be applied with a Kährs mop.
  
• Kahrs Silk Matt Lacquer 1 litre
  Used for recoating a Kährs floor with silk matt finish. The finish has a high resistance to wear and common household chemicals. Kährs Remover should be used before applying Kährs Silk Matt Lacquer. Covers 10-12m2.
  
• Kahrs Solid Ash Matt Edge Trim 2.4m
  Made from solid ash to match Kahrs ash matt lacquer floors. An edge trim is to be used where a wooden floor meets a hearth, patiodoor, front door, back door, or to butt up to a step. It can also be used to create an inset door mat recess. They are prefinished with a satin lacquer. Kahrs and Natura trims may not match each other exactly so we suggest purchasing the same manufacturer for adjoining trims. We recommend this product be installed with Laybond Gripfill Adhesive.
  
• Kahrs Solid Ash Matt Ramp Trim 2.4m
  Made from solid ash to match Kahrs ash matt lacquer floors. A ramp trim is to be used where a wooden floor reduces down to the level that your new wooden flooring is installed against, e.g. vinyl, floor boards. They are prefinished with a satin lacquer. Kahrs and Natura trims may not match each other exactly so we suggest purchasing the same manufacturer for adjoining trims. We recommend this product be installed with Laybond Gripfill Adhesive.
  
• Kahrs Solid Ash Matt Stairnosing for Woodloc 1.2m
  Made from solid ash to match Kahrs ash matt lacquer floors. A stair-nosing is designed to finish off the area on the edge of a step or stair. They are pre-finished with a satin lacquer. We recommend this product be installed with Laybond Gripfill Adhesive.
  
• Kahrs Solid Ash Matt Threshold Trim 2.4m
  Made from solid ash to match Kahrs ash matt lacquer floors. A threshold trim is to be used where a wooden floor meets a floor of the supportable same or similar height, e.g. wood or tiles. These are prefinished with a satin lacquer. Kahrs and Natura trims may not match each other exactly so we suggest purchasing the same manufacturer for adjoining trims. We recommend this product be installed with Laybond Gripfill Adhesive.
  
• Kahrs Solid Ash Satin Edge Trim 2.4m
  Made from solid ash to match Kahrs satin lacquer floors. An edge trim is to be used where a wooden floor meets a hearth, patiodoor, front door, back door, or to butt up to a step. It can also be used to create an inset door mat recess. They are prefinished with a satin lacquer. Kahrs and Natura trims may not match each other exactly so we suggest purchasing the same manufacturer for adjoining trims. We recommend this product be installed with Laybond Gripfill Adhesive.
  
• Kahrs Solid Ash Satin Ramp Trim 2.4m
  Made from solid ash to match Kahrs ash satin lacquer floors. A ramp trim is to be used where a wooden floor reduces down to the level that your new wooden flooring is installed against, e.g. vinyl, floor boards. They are prefinished with a satin lacquer. Kahrs and Natura trims may not match each other exactly so we suggest purchasing the same manufacturer for adjoining trims. We recommend this product be installed with Laybond Gripfill Adhesive.
  
• Kahrs Solid Ash Satin Stairnosing for Woodloc 1.2m
  Made from solid ash to match Kahrs ash satin lacquer floors. A stair-nosing is designed to finish off the area on the edge of a step or stair. They are pre-finished with a satin lacquer. We recommend this product be installed with Laybond Gripfill Adhesive.
  
• Kahrs Solid Ash Satin Threshold Trim 2.4m
  Made from solid ash to match Kahrs ash satin lacquer floors. A threshold trim is to be used where a wooden floor meets a floor of the supportable same or similar height, e.g. wood or tiles. These are prefinished with a satin lacquer. Kahrs and Natura trims may not match each other exactly so we suggest purchasing the same manufacturer for adjoining trims. We recommend this product be installed with Laybond Gripfill Adhesive.
  
• Kahrs Solid Ash Scotia 2.4m
  Made from solid wood to match your chosen floor, a Scotia is of concave design, used around the edge of the room to hide the expansion gap required when installing wooden flooring. Supplied unfinished and can be left unfinished, or lacquered, oiled or stained depending on personal preference. We recommend this product is installed by pinning in conjunction with Laybond Gripfill Adhesive.
  
• Kahrs Solid Ash White Edge Trim 2.4m
  Made from solid ash to match Kahrs ash white matt lacquer floors. An edge trim is to be used where a wooden floor meets a hearth, patiodoor, front door, back door, or to butt up to a step. It can also be used to create an inset door mat recess. They are prefinished with a satin lacquer. Kahrs and Natura trims may not match each other exactly so we suggest purchasing the same manufacturer for adjoining trims. We recommend this product be installed with Laybond Gripfill Adhesive.
  
• Kahrs Solid Ash White Ramp Trim 2.4m
  Made from solid ash to match Kahrs ash white matt lacquer floors. A ramp trim is to be used where a wooden floor reduces down to the level that your new wooden flooring is installed against, e.g. vinyl, floor boards. They are prefinished with a satin lacquer. Kahrs and Natura trims may not match each other exactly so we suggest purchasing the same manufacturer for adjoining trims. We recommend this product be installed with Laybond Gripfill Adhesive.
  
• Kahrs Solid Ash White Stairnosing for Woodloc 1.2m
  Made from solid ash to match Kahrs ash white matt lacquer floors. A stair-nosing is designed to finish off the area on the edge of a step or stair. They are pre-finished with a satin lacquer. We recommend this product be installed with Laybond Gripfill Adhesive.
  
• Kahrs Solid Ash White Threshold Trim 2.4m
  Made from solid ash to match Kahrs ash white matt lacquer floors. A threshold trim is to be used where a wooden floor meets a floor of the supportable same or similar height, e.g. wood or tiles. These are prefinished with a satin lacquer. Kahrs and Natura trims may not match each other exactly so we suggest purchasing the same manufacturer for adjoining trims. We recommend this product be installed with Laybond Gripfill Adhesive.
  
• Kahrs Solid Beech Edge Trim 2.4m
  Made from solid wood to match your chosen floor. An edge trim is to be used where a wooden floor meets a hearth, patiodoor, front door, back door, or to butt up to a step. It can also be used to create an inset door mat recess. They are prefinished with a satin lacquer. Kahrs and Natura trims may not match each other exactly so we suggest purchasing the same manufacturer for adjoining trims. We recommend this product be installed with Laybond Gripfill Adhesive.
  
• Kahrs Solid Beech Linnea Edge Trim 2.4m
  Made from solid wood to match your chosen floor. An edge trim is to be used where a wooden floor meets a hearth, patiodoor, front door, back door, or to butt up to a step. It can also be used to create an inset door mat recess. They are prefinished with a satin lacquer. Kahrs and Natura trims may not match each other exactly so we suggest purchasing the same manufacturer for adjoining trims. We recommend this product be installed with Laybond Gripfill Adhesive.
  
• Kahrs Solid Beech Linnea Ramp Trim 2.4m
  Made from solid wood to match your chosen floor a ramp trim is to be used where a wooden floor reduces down to the level that your new wooden flooring is installed against, e.g. vinyl, floor boards. They are prefinished with a satin lacquer. Kahrs and Natura trims may not match each other exactly so we suggest purchasing the same manufacturer for adjoining trims. We recommend this product be installed with Laybond Gripfill Adhesive.
  
• Kahrs Solid Beech Linnea Stairnosing 1.2m
  Made from solid wood to match your chosen floor. A stair-nosing is designed to finish off the area on the edge of a step or stair. They are pre-finished with a satin lacquer. We recommend this product be installed with Laybond Gripfill Adhesive.
  
• Kahrs Solid Beech Linnea Threshold Trim 2.4m
  Made from solid wood to match your chosen floor. A threshold trim is to be used where a wooden floor meets a floor of the supportable same or similar height, e.g. wood or tiles. These are prefinished with a satin lacquer. Kahrs and Natura trims may not match each other exactly so we suggest purchasing the same manufacturer for adjoining trims. We recommend this product be installed with Laybond Gripfill Adhesive.
  
• Kahrs Solid Beech Ramp Trim 2.4m
  Made from solid wood to match your chosen floor a ramp trim is to be used where a wooden floor reduces down to the level that your new wooden flooring is installed against, e.g. vinyl, floor boards. They are prefinished with a satin lacquer. Kahrs and Natura trims may not match each other exactly so we suggest purchasing the same manufacturer for adjoining trims. We recommend this product be installed with Laybond Gripfill Adhesive.
  
• Kahrs Solid Beech Stairnosing for Woodloc 1.2m
  Made from solid wood to match your chosen floor. A stair-nosing is designed to finish off the area on the edge of a step or stair. They are pre-finished with a satin lacquer. We recommend this product be installed with Laybond Gripfill Adhesive.
  
• Kahrs Solid Beech Threshold Trim 2.4m
  Made from solid wood to match your chosen floor. A threshold trim is to be used where a wooden floor meets a floor of the supportable same or similar height, e.g. wood or tiles. These are prefinished with a satin lacquer. Kahrs and Natura trims may not match each other exactly so we suggest purchasing the same manufacturer for adjoining trims. We recommend this product be installed with Laybond Gripfill Adhesive.
  
• Kahrs Solid Cherry Edge Trim 2.4m
  Made from solid wood to match your chosen floor. An edge trim is to be used where a wooden floor meets a hearth, patiodoor, front door, back door, or to butt up to a step. It can also be used to create an inset door mat recess. They are prefinished with a satin lacquer. Kahrs and Natura trims may not match each other exactly so we suggest purchasing the same manufacturer for adjoining trims. We recommend this product be installed with Laybond Gripfill Adhesive.
  
• Kahrs Solid Cherry Linnea Edge Trim 2.4m
  Made from solid wood to match your chosen floor. An edge trim is to be used where a wooden floor meets a hearth, patiodoor, front door, back door, or to butt up to a step. It can also be used to create an inset door mat recess. They are prefinished with a satin lacquer. Kahrs and Natura trims may not match each other exactly so we suggest purchasing the same manufacturer for adjoining trims. We recommend this product be installed with Laybond Gripfill Adhesive.
  
• Kahrs Solid Cherry Linnea Ramp Trim 2.4m
  Made from solid wood to match your chosen floor a ramp trim is to be used where a wooden floor reduces down to the level that your new wooden flooring is installed against, e.g. vinyl, floor boards. They are prefinished with a satin lacquer. Kahrs and Natura trims may not match each other exactly so we suggest purchasing the same manufacturer for adjoining trims. We recommend this product be installed with Laybond Gripfill Adhesive.
  
• Kahrs Solid Cherry Linnea Stairnosing 1.2m
  Made from solid wood to match your chosen floor. A stair-nosing is designed to finish off the area on the edge of a step or stair. They are pre-finished with a satin lacquer. We recommend this product be installed with Laybond Gripfill Adhesive.
  
• Kahrs Solid Cherry Linnea Threshold Trim 2.4m
  Made from solid wood to match your chosen floor. A threshold trim is to be used where a wooden floor meets a floor of the supportable same or similar height, e.g. wood or tiles. These are prefinished with a satin lacquer. Kahrs and Natura trims may not match each other exactly so we suggest purchasing the same manufacturer for adjoining trims. We recommend this product be installed with Laybond Gripfill Adhesive.
  
• Kahrs Solid Cherry Ramp Trim 2.4m
  Made from solid wood to match your chosen floor a ramp trim is to be used where a wooden floor reduces down to the level that your new wooden flooring is installed against, e.g. vinyl, floor boards. They are prefinished with a satin lacquer. Kahrs and Natura trims may not match each other exactly so we suggest purchasing the same manufacturer for adjoining trims. We recommend this product be installed with Laybond Gripfill Adhesive.
  
• Kahrs Solid Cherry Threshold Trim 2.4m
  Made from solid wood to match your chosen floor. A threshold trim is to be used where a wooden floor meets a floor of the supportable same or similar height, e.g. wood or tiles. These are prefinished with a satin lacquer. Kahrs and Natura trims may not match each other exactly so we suggest purchasing the same manufacturer for adjoining trims. We recommend this product be installed with Laybond Gripfill Adhesive.
  
• Kahrs Solid Maple Edge Trim 2.4m
  Made from solid wood to match your chosen floor. An edge trim is to be used where a wooden floor meets a hearth, patiodoor, front door, back door, or to butt up to a step. It can also be used to create an inset door mat recess. They are prefinished with a satin lacquer. Kahrs and Natura trims may not match each other exactly so we suggest purchasing the same manufacturer for adjoining trims. We recommend this product be installed with Laybond Gripfill Adhesive.
  
• Kahrs Solid Maple Linnea Edge Trim 2.4m
  Made from solid wood to match your chosen floor. An edge trim is to be used where a wooden floor meets a hearth, patiodoor, front door, back door, or to butt up to a step. It can also be used to create an inset door mat recess. They are prefinished with a satin lacquer. Kahrs and Natura trims may not match each other exactly so we suggest purchasing the same manufacturer for adjoining trims. We recommend this product be installed with Laybond Gripfill Adhesive.
  
• Kahrs Solid Maple Linnea Ramp Trim 2.4m
  Made from solid wood to match your chosen floor a ramp trim is to be used where a wooden floor reduces down to the level that your new wooden flooring is installed against, e.g. vinyl, floor boards. They are prefinished with a satin lacquer. Kahrs and Natura trims may not match each other exactly so we suggest purchasing the same manufacturer for adjoining trims. We recommend this product be installed with Laybond Gripfill Adhesive.
  
• Kahrs Solid Maple Linnea Stairnosing 1.2m
  Made from solid wood to match your chosen floor. A stair-nosing is designed to finish off the area on the edge of a step or stair. They are pre-finished with a satin lacquer. We recommend this product be installed with Laybond Gripfill Adhesive.
  
• Kahrs Solid Maple Linnea Threshold Trim 2.4m
  Made from solid wood to match your chosen floor. A threshold trim is to be used where a wooden floor meets a floor of the supportable same or similar height, e.g. wood or tiles. These are prefinished with a satin lacquer. Kahrs and Natura trims may not match each other exactly so we suggest purchasing the same manufacturer for adjoining trims. We recommend this product be installed with Laybond Gripfill Adhesive.
  
• Kahrs Solid Maple Ramp Trim 2.4m
  Made from solid wood to match your chosen floor a ramp trim is to be used where a wooden floor reduces down to the level that your new wooden flooring is installed against, e.g. vinyl, floor boards. They are prefinished with a satin lacquer. Kahrs and Natura trims may not match each other exactly so we suggest purchasing the same manufacturer for adjoining trims. We recommend this product be installed with Laybond Gripfill Adhesive.
  
• Kahrs Solid Maple Stairnosing for Woodloc 1.2m
  Made from solid wood to match your chosen floor. A stair-nosing is designed to finish off the area on the edge of a step or stair. They are pre-finished with a satin lacquer. We recommend this product be installed with Laybond Gripfill Adhesive.
  
• Kahrs Solid Maple Threshold Trim 2.4m
  Made from solid wood to match your chosen floor. A threshold trim is to be used where a wooden floor meets a floor of the supportable same or similar height, e.g. wood or tiles. These are prefinished with a satin lacquer. Kahrs and Natura trims may not match each other exactly so we suggest purchasing the same manufacturer for adjoining trims. We recommend this product be installed with Laybond Gripfill Adhesive.
  
• Kahrs Solid Oak Cognac Edge Trim 2.4m
  Made from solid wood to match your chosen cognac coloured matt lacquer floor. An edge trim is to be used where a wooden floor meets a hearth, patiodoor, front door, back door, or to butt up to a step. It can also be used to create an inset door mat recess. They are prefinished with a satin lacquer. Kahrs and Natura trims may not match each other exactly so we suggest purchasing the same manufacturer for adjoining trims. We recommend this product be installed with Laybond Gripfill Adhesive.
  
• Kahrs Solid Oak Cognac Ramp Trim 2.4m
  Made from solid wood to match your chosen cognac coloured matt lacquer floor a ramp trim is to be used where a wooden floor reduces down to the level that your new wooden flooring is installed against, e.g. vinyl, floor boards. They are prefinished with a satin lacquer. Kahrs and Natura trims may not match each other exactly so we suggest purchasing the same manufacturer for adjoining trims. We recommend this product be installed with Laybond Gripfill Adhesive.
  
• Kahrs Solid Oak Cognac Threshold Trim 2.4m
  Made from solid wood to match your chosen cognac coloured matt lacquer floor. A threshold trim is to be used where a wooden floor meets a floor of the supportable same or similar height, e.g. wood or tiles. These are prefinished with a satin lacquer. Kahrs and Natura trims may not match each other exactly so we suggest purchasing the same manufacturer for adjoining trims. We recommend this product be installed with Laybond Gripfill Adhesive.
  
• Kahrs Solid Oak Linnea Edge Trim 2.4m
  Made from solid wood to match your chosen floor. An edge trim is to be used where a wooden floor meets a hearth, patiodoor, front door, back door, or to butt up to a step. It can also be used to create an inset door mat recess. They are prefinished with a satin lacquer. Kahrs and Natura trims may not match each other exactly so we suggest purchasing the same manufacturer for adjoining trims. We recommend this product be installed with Laybond Gripfill Adhesive.
  
• Kahrs Solid Oak Linnea Ramp Trim 2.4m
  Made from solid wood to match your chosen floor a ramp trim is to be used where a wooden floor reduces down to the level that your new wooden flooring is installed against, e.g. vinyl, floor boards. They are prefinished with a satin lacquer. Kahrs and Natura trims may not match each other exactly so we suggest purchasing the same manufacturer for adjoining trims. We recommend this product be installed with Laybond Gripfill Adhesive.
  
• Kahrs Solid Oak Linnea Stairnosing 1.2m
  Made from solid wood to match your chosen floor. A stair-nosing is designed to finish off the area on the edge of a step or stair. They are pre-finished with a satin lacquer. We recommend this product be installed with Laybond Gripfill Adhesive.
  
• Kahrs Solid Oak Linnea Stairnosing 2.4m
  Made from solid wood to match your chosen floor. A stair-nosing is designed to finish off the area on the edge of a step or stair. They are pre-finished with a satin lacquer. We recommend this product be installed with Laybond Gripfill Adhesive.
  
• Kahrs Solid Oak Linnea Threshold Trim 2.4m
  Made from solid wood to match your chosen floor. A threshold trim is to be used where a wooden floor meets a floor of the supportable same or similar height, e.g. wood or tiles. These are prefinished with a satin lacquer. Kahrs and Natura trims may not match each other exactly so we suggest purchasing the same manufacturer for adjoining trims. We recommend this product be installed with Laybond Gripfill Adhesive.
  
• Kahrs Solid Oak Matt Edge Trim 2.4m
  Made from solid wood to match your chosen matt lacquer floor. An edge trim is to be used where a wooden floor meets a hearth, patiodoor, front door, back door, or to butt up to a step. It can also be used to create an inset door mat recess. They are prefinished with a satin lacquer. Kahrs and Natura trims may not match each other exactly so we suggest purchasing the same manufacturer for adjoining trims. We recommend this product be installed with Laybond Gripfill Adhesive.
  
• Kahrs Solid Oak Matt Ramp Trim 2.4m
  Made from solid wood to match your chosen matt lacquer floor a ramp trim is to be used where a wooden floor reduces down to the level that your new wooden flooring is installed against, e.g. vinyl, floor boards. They are prefinished with a satin lacquer. Kahrs and Natura trims may not match each other exactly so we suggest purchasing the same manufacturer for adjoining trims. We recommend this product be installed with Laybond Gripfill Adhesive.
  
• Kahrs Solid Oak Matt Stairnosing for Woodloc 1.2m
  Made from solid wood to match your chosen matt lacquer floor. A stair-nosing is designed to finish off the area on the edge of a step or stair. They are pre-finished with a satin lacquer. We recommend this product be installed with Laybond Gripfill Adhesive.
  
• Kahrs Solid Oak Matt Threshold Trim 2.4m
  Made from solid wood to match your chosen matt lacquer floor. A threshold trim is to be used where a wooden floor meets a floor of the supportable same or similar height, e.g. wood or tiles. These are prefinished with a satin lacquer. Kahrs and Natura trims may not match each other exactly so we suggest purchasing the same manufacturer for adjoining trims. We recommend this product be installed with Laybond Gripfill Adhesive.
  
• Kahrs Solid Oak Satin Edge Trim 2.4m
  Made from solid wood to match your chosen satin lacquer floor. An edge trim is to be used where a wooden floor meets a hearth, patiodoor, front door, back door, or to butt up to a step. It can also be used to create an inset door mat recess. They are prefinished with a satin lacquer. Kahrs and Natura trims may not match each other exactly so we suggest purchasing the same manufacturer for adjoining trims. We recommend this product be installed with Laybond Gripfill Adhesive.
  
• Kahrs Solid Oak Satin Ramp Trim 2.4m
  Made from solid wood to match your chosen satin lacquer floor a ramp trim is to be used where a wooden floor reduces down to the level that your new wooden flooring is installed against, e.g. vinyl, floor boards. They are prefinished with a satin lacquer. Kahrs and Natura trims may not match each other exactly so we suggest purchasing the same manufacturer for adjoining trims. We recommend this product be installed with Laybond Gripfill Adhesive.
  
• Kahrs Solid Oak Satin Threshold Trim 2.4m
  Made from solid wood to match your chosen satin lacquer floor. A threshold trim is to be used where a wooden floor meets a floor of the supportable same or similar height, e.g. wood or tiles. These are prefinished with a satin lacquer. Kahrs and Natura trims may not match each other exactly so we suggest purchasing the same manufacturer for adjoining trims. We recommend this product be installed with Laybond Gripfill Adhesive.
  
• Kahrs Solid Oak Stairnosing for T and G Floors
  Made from solid wood to match your chosen floor. A stair-nosing is designed to finish off the area on the edge of a step or stair. They are pre-finished with a satin lacquer. We recommend this product be installed with Laybond Gripfill Adhesive.
  
• Kahrs Solid Oak Stairnosing for Woodloc 1.2m
  Made from solid wood to match your chosen floor. A stair-nosing is designed to finish off the area on the edge of a step or stair. They are pre-finished with a satin lacquer. We recommend this product be installed with Laybond Gripfill Adhesive.
  
• Kahrs Solid Oak Stairnosing for Woodloc 2.4m
  Made from solid wood to match your chosen floor. A stair-nosing is designed to finish off the area on the edge of a step or stair. They are pre-finished with a satin lacquer. We recommend this product be installed with Laybond Gripfill Adhesive.
  
• Kahrs Solid Walnut Edge Trim 2.4m
  Made from solid wood to match your chosen floor. An edge trim is to be used where a wooden floor meets a hearth, patiodoor, front door, back door, or to butt up to a step. It can also be used to create an inset door mat recess. They are prefinished with a satin lacquer. Kahrs and Natura trims may not match each other exactly so we suggest purchasing the same manufacturer for adjoining trims. We recommend this product be installed with Laybond Gripfill Adhesive.
  
• Kahrs Solid Walnut Linnea Edge Trim 2.4m
  Made from solid wood to match your chosen floor. An edge trim is to be used where a wooden floor meets a hearth, patiodoor, front door, back door, or to butt up to a step. It can also be used to create an inset door mat recess. They are prefinished with a satin lacquer. Kahrs and Natura trims may not match each other exactly so we suggest purchasing the same manufacturer for adjoining trims. We recommend this product be installed with Laybond Gripfill Adhesive.
  
• Kahrs Solid Walnut Linnea Ramp Trim 2.4m
  Made from solid wood to match your chosen floor a ramp trim is to be used where a wooden floor reduces down to the level that your new wooden flooring is installed against, e.g. vinyl, floor boards. They are prefinished with a satin lacquer. Kahrs and Natura trims may not match each other exactly so we suggest purchasing the same manufacturer for adjoining trims. We recommend this product be installed with Laybond Gripfill Adhesive.
  
• Kahrs Solid Walnut Linnea Threshold Trim 2.4m
  Made from solid wood to match your chosen floor. A threshold trim is to be used where a wooden floor meets a floor of the supportable same or similar height, e.g. wood or tiles. These are prefinished with a satin lacquer. Kahrs and Natura trims may not match each other exactly so we suggest purchasing the same manufacturer for adjoining trims. We recommend this product be installed with Laybond Gripfill Adhesive.
  
• Kahrs Solid Walnut Ramp Trim 2.4m
  Made from solid wood to match your chosen floor a ramp trim is to be used where a wooden floor reduces down to the level that your new wooden flooring is installed against, e.g. vinyl, floor boards. They are prefinished with a satin lacquer. Kahrs and Natura trims may not match each other exactly so we suggest purchasing the same manufacturer for adjoining trims. We recommend this product be installed with Laybond Gripfill Adhesive.
  
• Kahrs Solid Walnut Stairnosing for Woodloc
  Made from solid wood to match your chosen floor. A stair-nosing is designed to finish off the area on the edge of a step or stair. They are pre-finished with a satin lacquer. We recommend this product be installed with Laybond Gripfill Adhesive.
  
• Kahrs Solid Walnut Threshold Trim 2.4m
  Made from solid wood to match your chosen floor. A threshold trim is to be used where a wooden floor meets a floor of the supportable same or similar height, e.g. wood or tiles. These are prefinished with a satin lacquer. Kahrs and Natura trims may not match each other exactly so we suggest purchasing the same manufacturer for adjoining trims. We recommend this product be installed with Laybond Gripfill Adhesive.
  
• Karndean A2 Adhesive Spreader
  Used to spread adhesive onto the subfloor.
  
• Karndean Basic Cleaner and Stripper 2 litre
  Basic Cleaner and Stripper for Karndean flooring one bottle covers approximately 125m2
  
• Karndean Clean Start Pack
  This kit contains: Basic Cleaner and Stripper, Dim Glow Floor Protector, Routine Cleaner, 2 x floor pads and felt floor protectors.
  
• Karndean Dim Glow Floor Protector 2 litre
  Dim Glow Floor Protector for use with Karndean flooring one bottle covers approximately 45m2
  
• Karndean Epoxy Adhesive 4 litre
  A two part adhesive providing an exceptionally strong bond. Recommended for areas subject to excessive moisture. Covers approx. 15m2.
  
• Karndean High Temperature Adhesive 15 litre
  Ideal for rooms with excessive heat, eg. Conservatories or rooms with underfloor heating. Covers approx. 50m2.
  
• Karndean High Temperature Adhesive 5 litre
  Ideal for rooms with excessive heat, eg. Conservatories or rooms with underfloor heating. Covers approx. 17m2.
  
• Karndean Pressure Sensitive Adhesive 15 litre
  Suitable for use in normal conditions excluding areas subject to excessive temperature and moisture. Covers approx. 50m2.
  
• Karndean Pressure Sensitive Adhesive 2.5 litre
  Suitable for use in normal conditions excluding areas subject to excessive temperature and moisture. Covers approx. 10m2.
  
• Karndean Pressure Sensitive Adhesive 5 litre
  Suitable for use in normal conditions excluding areas subject to excessive temperature and moisture. Covers approx. 20m2.
  
• Karndean Routine Cleaner 2 litre
  Routine cleaner to help with the maintenance of Karndean flooring one bottle covers approximately 125m2 (Concentrate)
  
• Karndean Skim Coat 5kg
  A rapid drying floor finishing compound - designed to be used over wood and cementitious bases. Covers approximately 25 m2 per tub
  
• Karndean Universal Adhesive 15 litre
  Karndean Universal Adhesive 15 litre has been formulated as resin-free, wet-bed high temperature dispersion adhesive which is easy to apply and maintains good open time and grab. It is designed to give you better results and as its name implies it can be used in almost any environment, such as bathrooms and conservatories. Covers 70m2.
  
• Karndean Universal Adhesive 5 litre
  Karndean Universal Adhesive 5 litre has been formulated as resin-free, wet-bed high temperature dispersion adhesive which is easy to apply and maintains good open time and grab. It is designed to give you better results and as its name implies it can be used in almost any environment, such as bathrooms and conservatories. Covers 23m2.
  
• Laybond Gripfill Adhesive for Solid Wood Trims
  High performance multi purpose adhesive for bonding all solid wood door trims and skirting. We recommend this product for gluing solid wood trims to the sub-floor (please prime the subfloor before application). Contains 350ml which covers approximately 12 linear metres at a 6mm bead.
  
• Laybond L16 Woodbond Adhesive
  Coverage: approx 8m2 per 5lt tin. This Woodbond adhesive is for sticking Natura Parquet blocks or Natura solid wood flooring to your subfloor. We recommend the use of L16 Woodbond adhesive with any solid wood floor that is 150mm wide or less.
  Datasheet for L16 Wood Bond Adhesive
  Installation guide for L16 Wood Bond Batten Adhesive
  
• Multipack Felt Floor Protectors
  A very reasonable way to prolong the life of your new floor! These hard wearing felt pads are self adhesive and should be used on each piece of furniture that comes into contact with your flooring. Each pack contains 34 felt pads consisting of 16 x 22m round pads, 16 x 28mm pads and 2 rectangular pads 120mm x 80mm in size.
  
• Natura Bronze Underlay
  This product is 3mm thick foam and comes with a built in DPM (damp proof membrane) layer which is vital for any installation over concrete. Light and easy to handle and it cuts and fits with ease. Fair thermal insulation and sound impact reduction qualities. It can be used downstairs and upstairs in the home, although we suggest considering a specific acoustic underlay if noise is an issue.
  
• Natura Foam Underlay
  Natura foam underlay is ideal for use with laminate or wood flooring. The 2mm thickness P.E poly foam underlay offers some sound reduction and thermal insulation, but doesn’t come with a DPM. This underlay is ideally used over wood or chipboard subfloors. Sold as cut lengths to the nearest 1m2.
  
• Natura Gold Acoustic Underlay
  Natura Gold acoustic offers exceptional performance for comfort, support, and acoustic reduction, up to 22db. This product also offers excellent thermal insulation properties making it ideal for underfloor heating systems. Made with non-toxic and non-dusting materials this underlay will effectively even out minor floor imperfections. A gold foil vapour barrier with a 200mm over lap acts as an excellent DPM (damp proof membrane) to protect your floor for moisture attached to a high density foam core with high compressive and recovery strength.
  
• Natura Laminate Aberdeen Oak Quadrant
  Natura quadrant is used around the edge of the room to hide the expansion gap required when installing laminate flooring. Product colour may differ from that shown in the picture but it will be supplied to match Natura Aberdeen Oak laminate in the closest match possible.
  
• Natura Laminate Aberdeen Oak Skirting
  Laminate Skirting is used around the edge of the room to hide the expansion gap required when installing laminate flooring. Product colour may differ from that shown in the picture but it will be supplied to match Natura Aberdeen Oak laminate in the closest match possible.
  
• Natura Laminate Antique Oak Quadrant
  Natura quadrant is used around the edge of the room to hide the expansion gap required when installing laminate flooring. Product colour may differ from that shown in the picture but it will be supplied to match Natura Antique Oak laminate in the closest match possible.
  
• Natura Laminate Antique Oak Skirting
  Laminate Skirting is used around the edge of the room to hide the expansion gap required when installing laminate flooring. Product colour may differ from that shown in the picture but it will be supplied to match Natura Antique Oak laminate in the closest match possible.
  
• Natura Laminate Aspen Oak Quadrant
  Natura quadrant is used around the edge of the room to hide the expansion gap required when installing laminate flooring. Product colour may differ from that shown in the picture but it will be supplied to match Natura Aspen Oak laminate in the closest match possible.
  
• Natura Laminate Aspen Oak Skirting
  Laminate Skirting is used around the edge of the room to hide the expansion gap required when installing laminate flooring. Product colour may differ from that shown in the picture but it will be supplied to match Natura Aspen Oak laminate in the closest match possible.
  
• Natura Laminate Blonde Oak Quadrant
  Natura quadrant is used around the edge of the room to hide the expansion gap required when installing laminate flooring. Product colour may differ from that shown in the picture but it will be supplied to match Natura Blonde Oak laminate in the closest match possible.
  
• Natura Laminate Blonde Oak Skirting
  Laminate Skirting is used around the edge of the room to hide the expansion gap required when installing laminate flooring. Product colour may differ from that shown in the picture but it will be supplied to match Natura Blonde Oak laminate in the closest match possible.
  
• Natura Laminate Cinnamon Oak Quadrant
  Natura quadrant is used around the edge of the room to hide the expansion gap required when installing laminate flooring. Product colour may differ from that shown in the picture but it will be supplied to match Natura Cinnamon Oak laminate in the closest match possible.
  
• Natura Laminate Cinnamon Oak Skirting
  Laminate Skirting is used around the edge of the room to hide the expansion gap required when installing laminate flooring. Product colour may differ from that shown in the picture but it will be supplied to match Natura Cinnamon Oak laminate in the closest match possible.
  
• Natura Laminate Colonial Oak Quadrant
  Natura quadrant is used around the edge of the room to hide the expansion gap required when installing laminate flooring. Product colour may differ from that shown in the picture but it will be supplied to match Natura Colonial Oak laminate in the closest match possible.
  
• Natura Laminate Colonial Oak Skirting
  Laminate Skirting is used around the edge of the room to hide the expansion gap required when installing laminate flooring. Product colour may differ from that shown in the picture but it will be supplied to match Natura Colonial Oak laminate in the closest match possible.
  
• Natura Laminate Cottage Oak Quadrant
  Natura quadrant is used around the edge of the room to hide the expansion gap required when installing laminate flooring. Product colour may differ from that shown in the picture but it will be supplied to match Natura Cottage Oak laminate in the closest match possible.
  
• Natura Laminate Cottage Oak Skirting
  Laminate Skirting is used around the edge of the room to hide the expansion gap required when installing laminate flooring. Product colour may differ from that shown in the picture but it will be supplied to match Natura Cottage Oak laminate in the closest match possible.
  
• Natura Laminate English Oak Quadrant
  Natura quadrant is used around the edge of the room to hide the expansion gap required when installing laminate flooring. Product colour may differ from that shown in the picture but it will be supplied to match Natura English Oak laminate in the closest match possible.
  
• Natura Laminate English Oak Skirting
  Laminate Skirting is used around the edge of the room to hide the expansion gap required when installing laminate flooring. Product colour may differ from that shown in the picture but it will be supplied to match Natura English Oak laminate in the closest match possible.
  
• Natura Laminate Flanders Oak Quadrant
  Natura quadrant is used around the edge of the room to hide the expansion gap required when installing laminate flooring. Product colour may differ from that shown in the picture but it will be supplied to match Natura Flanders Oak laminate in the closest match possible.
  
• Natura Laminate Flanders Oak Skirting
  Laminate Skirting is used around the edge of the room to hide the expansion gap required when installing laminate flooring. Product colour may differ from that shown in the picture but it will be supplied to match Natura Flanders Oak laminate in the closest match possible.
  
• Natura Laminate Harbour Oak Quadrant
  Natura quadrant is used around the edge of the room to hide the expansion gap required when installing laminate flooring. Product colour may differ from that shown in the picture but it will be supplied to match Natura Harbour Oak laminate in the closest match possible.
  
• Natura Laminate Harbour Oak Skirting
  Laminate Skirting is used around the edge of the room to hide the expansion gap required when installing laminate flooring. Product colour may differ from that shown in the picture but it will be supplied to match Natura Harbour Oak laminate in the closest match possible.
  
• Natura Laminate Harlech Oak Quadrant
  Natura quadrant is used around the edge of the room to hide the expansion gap required when installing laminate flooring. Product colour may differ from that shown in the picture but it will be supplied to match Natura Harlech Oak laminate in the closest match possible.
  
• Natura Laminate Harlech Oak Skirting
  Laminate Skirting is used around the edge of the room to hide the expansion gap required when installing laminate flooring. Product colour may differ from that shown in the picture but it will be supplied to match Natura Harlech Oak laminate in the closest match possible.
  
• Natura Laminate Harvest Oak Quadrant
  Natura quadrant is used around the edge of the room to hide the expansion gap required when installing laminate flooring. Product colour may differ from that shown in the picture but it will be supplied to match Natura Harvest Oak laminate in the closest match possible.
  
• Natura Laminate Harvester Oak Skirting
  Laminate Skirting is used around the edge of the room to hide the expansion gap required when installing laminate flooring. Product colour may differ from that shown in the picture but it will be supplied to match Natura Harvester Oak laminate in the closest match possible.
  
• Natura Laminate Italian Walnut Quadrant
  Natura quadrant is used around the edge of the room to hide the expansion gap required when installing laminate flooring. Product colour may differ from that shown in the picture but it will be supplied to match Natura Italian Walnut laminate in the closest match possible.
  
• Natura Laminate Italian Walnut Skirting
  Laminate Skirting is used around the edge of the room to hide the expansion gap required when installing laminate flooring. Product colour may differ from that shown in the picture but it will be supplied to match Natura Italian Walnut laminate in the closest match possible.
  
• Natura Laminate Kolberg Oak Quadrant
  Natura quadrant is used around the edge of the room to hide the expansion gap required when installing laminate flooring. Product colour may differ from that shown in the picture but it will be supplied to match Natura Kolberg Oak laminate in the closest match possible.
  
• Natura Laminate Kolberg Oak Skirting
  Laminate Skirting is used around the edge of the room to hide the expansion gap required when installing laminate flooring. Product colour may differ from that shown in the picture but it will be supplied to match Natura Kolberg Oak laminate in the closest match possible.
  
• Natura Laminate Light Brushed Oak Quadrant
  Natura quadrant is used around the edge of the room to hide the expansion gap required when installing laminate flooring. Product colour may differ from that shown in the picture but it will be supplied to match Natura Light Brushed Oak laminate in the closest match possible.
  
• Natura Laminate Light Brushed Oak Skirting
  Laminate Skirting is used around the edge of the room to hide the expansion gap required when installing laminate flooring. Product colour may differ from that shown in the picture but it will be supplied to match Natura Light Brushed Oak laminate in the closest match possible.
  
• Natura Laminate Living Beech Quadrant
  Natura quadrant is used around the edge of the room to hide the expansion gap required when installing laminate flooring. Product colour may differ from that shown in the picture but it will be supplied to match Natura Living Beech laminate in the closest match possible.
  
• Natura Laminate Living Beech Skirting
  Laminate Skirting is used around the edge of the room to hide the expansion gap required when installing laminate flooring. Product colour may differ from that shown in the picture but it will be supplied to match Natura Living Beech laminate in the closest match possible.
  
• Natura Laminate Matching Quadrant
  Natura quadrant is used around the edge of the room to hide the expansion gap required when installing laminate flooring. Supplied to match your chosen Natura laminate in the closest match possible. Product colour may differ from that shown in the picture.
  
• Natura Laminate Matching Skirting
  Laminate Skirting is used around the edge of the room to hide the expansion gap required when installing laminate flooring. Supplied to match your chosen Natura laminate in the closest match possible. Product colour may differ from that shown in the picture.
  
• Natura Laminate Mustang Slate Skirting
  Laminate Skirting is used around the edge of the room to hide the expansion gap required when installing laminate flooring. Product colour may differ from that shown in the picture but it will be supplied to match Natura Mustang Slate laminate in the closest match possible.
  
• Natura Laminate Palatino Travertine Skirting
  Laminate Skirting is used around the edge of the room to hide the expansion gap required when installing laminate flooring. Product colour may differ from that shown in the picture but it will be supplied to match Natura Palatino Travertine laminate in the closest match possible.
  
• Natura Laminate Scotia
  Natura scotia is of concave design, used around the edge of the room to hide the expansion gap required when installing laminate flooring. Supplied to match your chosen laminate in the closest match possible.
  
• Natura Laminate Shire Oak Quadrant
  Natura quadrant is used around the edge of the room to hide the expansion gap required when installing laminate flooring. Product colour may differ from that shown in the picture but it will be supplied to match Natura Shire Oak laminate in the closest match possible.
  
• Natura Laminate Shire Oak Skirting
  Laminate Skirting is used around the edge of the room to hide the expansion gap required when installing laminate flooring. Product colour may differ from that shown in the picture but it will be supplied to match Natura Shire Oak laminate in the closest match possible.
  
• Natura Laminate Virginia Walnut Quadrant
  Natura quadrant is used around the edge of the room to hide the expansion gap required when installing laminate flooring. Product colour may differ from that shown in the picture but it will be supplied to match Natura Virginia Walnut laminate in the closest match possible.
  
• Natura Laminate Virginia Walnut Skirting
  Laminate Skirting is used around the edge of the room to hide the expansion gap required when installing laminate flooring. Product colour may differ from that shown in the picture but it will be supplied to match Natura Virginia Walnut laminate in the closest match possible.
  
• Natura Laminate Wellington and Light Varnished Oak Quadrant
  Natura quadrant is used around the edge of the room to hide the expansion gap required when installing laminate flooring. Product colour may differ from that shown in the picture but it will be supplied to match Natura Wellington and Light Varnished Oak laminate in the closest match possible.
  
• Natura Laminate Wellington and Light Varnished Oak Skirting
  Laminate Skirting is used around the edge of the room to hide the expansion gap required when installing laminate flooring. Product colour may differ from that shown in the picture but it will be supplied to match Natura Wellington and Light Varnished Oak laminate in the closest match possible.
  
• Natura Laminate White Scotia
  Natura scotia is of concave design, used around the edge of the room to hide the expansion gap required when installing laminate flooring. Supplied with a white foil surface to complement existing skirting. We recommend this product is installed by pinning in conjunction with Laybond Gripfill Adhesive.
  
• Natura Light Oak Scotia
  Natura scotia is of concave design, used around the edge of the room to hide the expansion gap required when installing laminate flooring. Supplied to match your chosen laminate in the closest match possible. Product colour may differ from that shown in the picture – please check before ordering.
  
• Natura Light Oak Threshold 1m
  A threshold trim is to be used where a laminate floor meets a floor of the supportable same or similar height, e.g. carpet, wood or tiles. Please note: these trims are the closest match available as there are no specific trims to match the floor colour. Product colour may differ from that shown in the picture – please check before ordering.
  
• Natura Medium Oak Scotia
  Natura scotia is of concave design, used around the edge of the room to hide the expansion gap required when installing laminate flooring. Supplied to match your chosen laminate in the closest match possible. Product colour may differ from that shown in the picture – please check before ordering.
  
• Natura Medium Oak Threshold 1m
  A threshold trim is to be used where a laminate floor meets a floor of the supportable same or similar height, e.g. carpet, wood or tiles. Please note: these trims are the closest match available as there are no specific trims to match the floor colour. Product colour may differ from that shown in the picture – please check before ordering.
  
• Natura Oak Veneer Combistar Trim 1m
  Combistar trims are a multifunctional product which can be used in a technically unique way. With just one profile, flooring heights between 5-19mm can be accounted for. Using the same product, thanks to its adjustable fastening clips, height compensations of wood to carpet and wood to tile can also be accounted for.
  
• Natura Oak Veneer Combistar Trim 2m
  Combistar trims are a multifunctional product which can be used in a technically unique way. With just one profile, flooring heights between 5-19mm can be accounted for. Using the same product, thanks to its adjustable fastening clips, height compensations of wood to carpet and wood to tile can also be accounted for.
  
• Natura Peel and Stick Solid Wood Underlay
  Equates to £3.95m2. Peel and Stick underlay is the next generation in underlay for solid wood floors. It is sound reducing thermal insulating underlay incorporating a strong adhesive coating for easy installation.
  
• Natura Ramp Bar Gold
  A ramp trim is to be used where a laminate floor reduces down to the level that your new flooring is installed against, e.g. vinyl, floor boards. Supplied in Gold colour for a modern finish.
  
• Natura Ramp Bar Sand
  A ramp trim is to be used where a laminate floor reduces down to the level that your new flooring is installed against, e.g. vinyl, floor boards. Supplied in Sand colour for a modern finish.
  
• Natura Ramp Bar Silver
  A ramp trim is to be used where a laminate floor reduces down to the level that your new flooring is installed against, e.g. vinyl, floor boards. Supplied in Silver colour for a modern finish.
  
• Natura Ramp Bar Stainless Steel
  A ramp trim is to be used where a laminate floor reduces down to the level that your new flooring is installed against, e.g. vinyl, floor boards. Supplied in Stainless Steel colour for a modern finish.
  
• Natura Silver Acoustic Underlay
  Natura Silver offers good comfort and support and recovery whilst still remaining a good economic solution. A silver foil vapour barrier with a 200mm over lap acts as an excellent DPM (damp proof membrane) to protect your floor for moisture attached to a high density foam core with high compressive strength. Good thermal insulation and sound impact reduction qualities, up to 18db. It can also be used downstairs and upstairs in the home, although we suggest considering a specific acoustic underlay if noise is an issue.
  
• Natura Solid Ash Angle Edge 2.4m
  Made from solid wood to match your chosen floor. An angle edge is designed to finish off the area on the edge of a step or stair. They are prefinished with a satin lacquer. Kahrs and Natura trims may not match each other exactly so we suggest purchasing the same manufacturer for adjoining trims. We recommend this product be installed with Laybond Gripfill Adhesive.
  
• Natura Solid Ash Carpet Reducer Trim 1m
  Made from solid wood to match your chosen floor a carpet reducer is to be used where a wooden floor meets with a carpet or ceramic tiles. They are prefinished with a satin lacquer. We recommend this product be installed with Laybond Gripfill Adhesive.
  
• Natura Solid Ash Carpet Reducer Trim 2m
  Made from solid wood to match your chosen floor a carpet reducer is to be used where a wooden floor meets with a carpet or ceramic tiles. They are prefinished with a satin lacquer. We recommend this product be installed with Laybond Gripfill Adhesive.
  
• Natura Solid Ash Edge Trim 1m
  Made from solid wood to match your chosen floor. An edge trim is to be used where a wooden floor meets a hearth, patiodoor, front door, back door, or to butt up to a step. It can also be used to create an inset door mat recess. They are prefinished with a satin lacquer. Kahrs and Natura trims may not match each other exactly so we suggest purchasing the same manufacturer for adjoining trims. We recommend this product be installed with Laybond Gripfill Adhesive.
  
• Natura Solid Ash Edge Trim 2m
  Made from solid wood to match your chosen floor. An edge trim is to be used where a wooden floor meets a hearth, patiodoor, front door, back door, or to butt up to a step. It can also be used to create an inset door mat recess. They are prefinished with a satin lacquer. Kahrs and Natura trims may not match each other exactly so we suggest purchasing the same manufacturer for adjoining trims. We recommend this product be installed with Laybond Gripfill Adhesive.
  
• Natura Solid Ash Ramp Trim 1m
  Made from solid wood to match your chosen floor a ramp trim is to be used where a wooden floor reduces down to the level that your new wooden flooring is installed against, e.g. vinyl, floor boards. They are prefinished with a satin lacquer. Kahrs and Natura trims may not match each other exactly so we suggest purchasing the same manufacturer for adjoining trims. We recommend this product be installed with Laybond Gripfill Adhesive.
  
• Natura Solid Ash Ramp Trim 2m
  Made from solid wood to match your chosen floor a ramp trim is to be used where a wooden floor reduces down to the level that your new wooden flooring is installed against, e.g. vinyl, floor boards. They are prefinished with a satin lacquer. Kahrs and Natura trims may not match each other exactly so we suggest purchasing the same manufacturer for adjoining trims. We recommend this product be installed with Laybond Gripfill Adhesive.
  
• Natura Solid Ash Scotia 2m
  Made from solid wood to match your chosen floor, a Scotia is of concave design, used around the edge of the room to hide the expansion gap required when installing wooden flooring. This product is supplied prefinished. We recommend this product is installed by pinning in conjunction with Laybond Gripfill Adhesive.
  
• Natura Solid Ash Threshold Trim 1m
  Made from solid wood to match your chosen floor. A threshold trim is to be used where a wooden floor meets a floor of the supportable same or similar height, e.g. wood or tiles. These are prefinished with a satin lacquer. Kahrs and Natura trims may not match each other exactly so we suggest purchasing the same manufacturer for adjoining trims. We recommend this product be installed with Laybond Gripfill Adhesive.
  
• Natura Solid Ash Threshold Trim 2m
  Made from solid wood to match your chosen floor. A threshold trim is to be used where a wooden floor meets a floor of the supportable same or similar height, e.g. wood or tiles. These are prefinished with a satin lacquer. Kahrs and Natura trims may not match each other exactly so we suggest purchasing the same manufacturer for adjoining trims. We recommend this product be installed with Laybond Gripfill Adhesive.
  
• Natura Solid Beech Angle Edge 2.4m
  Made from solid wood to match your chosen floor. An angle edge is designed to finish off the area on the edge of a step or stair. They are prefinished with a satin lacquer. Kahrs and Natura trims may not match each other exactly so we suggest purchasing the same manufacturer for adjoining trims. We recommend this product be installed with Laybond Gripfill Adhesive.
  
• Natura Solid Beech Carpet Reducer Trim 1m
  Made from solid wood to match your chosen floor a carpet reducer is to be used where a wooden floor meets with a carpet or ceramic tiles. They are prefinished with a satin lacquer. We recommend this product be installed with Laybond Gripfill Adhesive.
  
• Natura Solid Beech Carpet Reducer Trim 2m
  Made from solid wood to match your chosen floor a carpet reducer is to be used where a wooden floor meets with a carpet or ceramic tiles. They are prefinished with a satin lacquer. We recommend this product be installed with Laybond Gripfill Adhesive.
  
• Natura Solid Beech Edge Trim 1m
  Made from solid wood to match your chosen floor. An edge trim is to be used where a wooden floor meets a hearth, patiodoor, front door, back door, or to butt up to a step. It can also be used to create an inset door mat recess. They are prefinished with a satin lacquer. Kahrs and Natura trims may not match each other exactly so we suggest purchasing the same manufacturer for adjoining trims. We recommend this product be installed with Laybond Gripfill Adhesive.
  
• Natura Solid Beech Edge Trim 2m
  Made from solid wood to match your chosen floor. An edge trim is to be used where a wooden floor meets a hearth, patiodoor, front door, back door, or to butt up to a step. It can also be used to create an inset door mat recess. They are prefinished with a satin lacquer. Kahrs and Natura trims may not match each other exactly so we suggest purchasing the same manufacturer for adjoining trims. We recommend this product be installed with Laybond Gripfill Adhesive.
  
• Natura Solid Beech Pipe Cover
  Made from Solid wood to match your chosen floor. Pipe covers are designed to be used around the edge of pipes which go into the floor to hide the expansion gap which is required when installing wooden flooring. Easy-install design in two halves that can be fixed around pipes to hide expansion gap. They are pre-finished with a satin lacquer. We recommend this product be installed by gluing the doweling and leaving the cover laid loosely over the expansion area.
  
• Natura Solid Beech Ramp Trim 1m
  Made from solid wood to match your chosen floor a ramp trim is to be used where a wooden floor reduces down to the level that your new wooden flooring is installed against, e.g. vinyl, floor boards. They are prefinished with a satin lacquer. Kahrs and Natura trims may not match each other exactly so we suggest purchasing the same manufacturer for adjoining trims. We recommend this product be installed with Laybond Gripfill Adhesive.
  
• Natura Solid Beech Ramp Trim 2m
  Made from solid wood to match your chosen floor a ramp trim is to be used where a wooden floor reduces down to the level that your new wooden flooring is installed against, e.g. vinyl, floor boards. They are prefinished with a satin lacquer. Kahrs and Natura trims may not match each other exactly so we suggest purchasing the same manufacturer for adjoining trims. We recommend this product be installed with Laybond Gripfill Adhesive.
  
• Natura Solid Beech Scotia 2m
  Made from solid wood to match your chosen floor, a Scotia is of concave design, used around the edge of the room to hide the expansion gap required when installing wooden flooring. This product is supplied prefinished. We recommend this product is installed by pinning in conjunction with Laybond Gripfill Adhesive.
  
• Natura Solid Beech Threshold Trim 1m
  Made from solid wood to match your chosen floor. A threshold trim is to be used where a wooden floor meets a floor of the supportable same or similar height, e.g. wood or tiles. These are prefinished with a satin lacquer. Kahrs and Natura trims may not match each other exactly so we suggest purchasing the same manufacturer for adjoining trims. We recommend this product be installed with Laybond Gripfill Adhesive.
  
• Natura Solid Beech Threshold Trim 2m
  Made from solid wood to match your chosen floor. A threshold trim is to be used where a wooden floor meets a floor of the supportable same or similar height, e.g. wood or tiles. These are prefinished with a satin lacquer. Kahrs and Natura trims may not match each other exactly so we suggest purchasing the same manufacturer for adjoining trims. We recommend this product be installed with Laybond Gripfill Adhesive.
  
• Natura Solid Cherry Angle Edge 2.4m
  Made from solid wood to match your chosen floor. An angle edge is designed to finish off the area on the edge of a step or stair. They are prefinished with a satin lacquer. Kahrs and Natura trims may not match each other exactly so we suggest purchasing the same manufacturer for adjoining trims. We recommend this product be installed with Laybond Gripfill Adhesive.
  
• Natura Solid Cherry Carpet Reducer 1m
  Made from solid wood to match your chosen floor a carpet reducer is to be used where a wooden floor meets with a carpet or ceramic tiles. They are prefinished with a satin lacquer. We recommend this product be installed with Laybond Gripfill Adhesive.
  
• Natura Solid Cherry Carpet Reducer Trim 2m
  Made from solid wood to match your chosen floor a carpet reducer is to be used where a wooden floor meets with a carpet or ceramic tiles. They are prefinished with a satin lacquer. We recommend this product be installed with Laybond Gripfill Adhesive.
  
• Natura Solid Cherry Edge Trim 1m
  Made from solid wood to match your chosen floor. An edge trim is to be used where a wooden floor meets a hearth, patiodoor, front door, back door, or to butt up to a step. It can also be used to create an inset door mat recess. They are prefinished with a satin lacquer. Kahrs and Natura trims may not match each other exactly so we suggest purchasing the same manufacturer for adjoining trims. We recommend this product be installed with Laybond Gripfill Adhesive.
  
• Natura Solid Cherry Edge Trim 2m
  Made from solid wood to match your chosen floor. An edge trim is to be used where a wooden floor meets a hearth, patiodoor, front door, back door, or to butt up to a step. It can also be used to create an inset door mat recess. They are prefinished with a satin lacquer. Kahrs and Natura trims may not match each other exactly so we suggest purchasing the same manufacturer for adjoining trims. We recommend this product be installed with Laybond Gripfill Adhesive.
  
• Natura Solid Cherry Pipe Cover
  Made from Solid wood to match your chosen floor. Pipe covers are designed to be used around the edge of pipes which go into the floor to hide the expansion gap which is required when installing wooden flooring. Easy-install design in two halves that can be fixed around pipes to hide expansion gap. They are pre-finished with a satin lacquer. We recommend this product be installed by gluing the doweling and leaving the cover laid loosely over the expansion area.
  
• Natura Solid Cherry Ramp Trim 1m
  Made from solid wood to match your chosen floor a ramp trim is to be used where a wooden floor reduces down to the level that your new wooden flooring is installed against, e.g. vinyl, floor boards. They are prefinished with a satin lacquer. Kahrs and Natura trims may not match each other exactly so we suggest purchasing the same manufacturer for adjoining trims. We recommend this product be installed with Laybond Gripfill Adhesive.
  
• Natura Solid Cherry Ramp Trim 2m
  Made from solid wood to match your chosen floor a ramp trim is to be used where a wooden floor reduces down to the level that your new wooden flooring is installed against, e.g. vinyl, floor boards. They are prefinished with a satin lacquer. Kahrs and Natura trims may not match each other exactly so we suggest purchasing the same manufacturer for adjoining trims. We recommend this product be installed with Laybond Gripfill Adhesive.
  
• Natura Solid Cherry Scotia 2m
  Made from solid wood to match your chosen floor, a Scotia is of concave design, used around the edge of the room to hide the expansion gap required when installing wooden flooring. This product is supplied prefinished. We recommend this product is installed by pinning in conjunction with Laybond Gripfill Adhesive.
  
• Natura Solid Cherry Threshold Trim 1m
  Made from solid wood to match your chosen floor. A threshold trim is to be used where a wooden floor meets a floor of the supportable same or similar height, e.g. wood or tiles. These are prefinished with a satin lacquer. Kahrs and Natura trims may not match each other exactly so we suggest purchasing the same manufacturer for adjoining trims. We recommend this product be installed with Laybond Gripfill Adhesive.
  
• Natura Solid Cherry Threshold Trim 2m
  Made from solid wood to match your chosen floor. A threshold trim is to be used where a wooden floor meets a floor of the supportable same or similar height, e.g. wood or tiles. These are prefinished with a satin lacquer. Kahrs and Natura trims may not match each other exactly so we suggest purchasing the same manufacturer for adjoining trims. We recommend this product be installed with Laybond Gripfill Adhesive.
  
• Natura Solid Jatoba Angle Edge 2.4m
  Made from solid wood to match your chosen floor. An angle edge is designed to finish off the area on the edge of a step or stair. They are prefinished with a satin lacquer. Kahrs and Natura trims may not match each other exactly so we suggest purchasing the same manufacturer for adjoining trims. We recommend this product be installed with Laybond Gripfill Adhesive.
  
• Natura Solid Jatoba Carpet Reducer 1m
  Made from solid wood to match your chosen floor a carpet reducer is to be used where a wooden floor meets with a carpet or ceramic tiles. They are prefinished with a satin lacquer. We recommend this product be installed with Laybond Gripfill Adhesive. Please note: these trims are the closest match available as there are no specific trims to match the floor colour.
  
• Natura Solid Jatoba Carpet Reducer 2m
  Made from solid wood to match your chosen floor a carpet reducer is to be used where a wooden floor meets with a carpet or ceramic tiles. They are prefinished with a satin lacquer. We recommend this product be installed with Laybond Gripfill Adhesive. Please note: these trims are the closest match available as there are no specific trims to match the floor colour.
  
• Natura Solid Jatoba Edge Trim 1m
  Made from solid wood to match your chosen floor. An edge trim is to be used where a wooden floor meets a hearth, patiodoor, front door, back door, or to butt up to a step. It can also be used to create an inset door mat recess. They are prefinished with a satin lacquer. Kahrs and Natura trims may not match each other exactly so we suggest purchasing the same manufacturer for adjoining trims. We recommend this product be installed with Laybond Gripfill Adhesive. Please note: these trims are the closest match available as there are no specific trims to match the floor colour.
  
• Natura Solid Jatoba Edge Trim 2m
  Made from solid wood to match your chosen floor. An edge trim is to be used where a wooden floor meets a hearth, patiodoor, front door, back door, or to butt up to a step. It can also be used to create an inset door mat recess. They are prefinished with a satin lacquer. Kahrs and Natura trims may not match each other exactly so we suggest purchasing the same manufacturer for adjoining trims. We recommend this product be installed with Laybond Gripfill Adhesive. Please note: these trims are the closest match available as there are no specific trims to match the floor colour.
  
• Natura Solid Jatoba Ramp Trim 1m
  Made from solid wood to match your chosen floor a ramp trim is to be used where a wooden floor reduces down to the level that your new wooden flooring is installed against, e.g. vinyl, floor boards. They are prefinished with a satin lacquer. Kahrs and Natura trims may not match each other exactly so we suggest purchasing the same manufacturer for adjoining trims. We recommend this product be installed with Laybond Gripfill Adhesive. Please note: these trims are the closest match available as there are no specific trims to match the floor colour.
  
• Natura Solid Jatoba Ramp Trim 2m
  Made from solid wood to match your chosen floor a ramp trim is to be used where a wooden floor reduces down to the level that your new wooden flooring is installed against, e.g. vinyl, floor boards. They are prefinished with a satin lacquer. Kahrs and Natura trims may not match each other exactly so we suggest purchasing the same manufacturer for adjoining trims. We recommend this product be installed with Laybond Gripfill Adhesive. Please note: these trims are the closest match available as there are no specific trims to match the floor colour.
  
• Natura Solid Jatoba Threshold Trim 1m
  Made from solid wood to match your chosen floor. A threshold trim is to be used where a wooden floor meets a floor of the supportable same or similar height, e.g. wood or tiles. These are prefinished with a satin lacquer. Kahrs and Natura trims may not match each other exactly so we suggest purchasing the same manufacturer for adjoining trims. We recommend this product be installed with Laybond Gripfill Adhesive. Please note: these trims are the closest match available as there are no specific trims to match the floor colour.
  
• Natura Solid Jatoba Threshold Trim 2m
  Made from solid wood to match your chosen floor. A threshold trim is to be used where a wooden floor meets a floor of the supportable same or similar height, e.g. wood or tiles. These are prefinished with a satin lacquer. Kahrs and Natura trims may not match each other exactly so we suggest purchasing the same manufacturer for adjoining trims. We recommend this product be installed with Laybond Gripfill Adhesive. Please note: these trims are the closest match available as there are no specific trims to match the floor colour.
  
• Natura Solid Maple Angle Edge 2.4m
  Made from solid wood to match your chosen floor. An angle edge is designed to finish off the area on the edge of a step or stair. They are prefinished with a satin lacquer. Kahrs and Natura trims may not match each other exactly so we suggest purchasing the same manufacturer for adjoining trims. We recommend this product be installed with Laybond Gripfill Adhesive.
  
• Natura Solid Maple Carpet Reducer Trim 1m
  Made from solid wood to match your chosen floor a carpet reducer is to be used where a wooden floor meets with a carpet or ceramic tiles. They are prefinished with a satin lacquer. We recommend this product be installed with Laybond Gripfill Adhesive.
  
• Natura Solid Maple Carpet Reducer Trim 2m
  Made from solid wood to match your chosen floor a carpet reducer is to be used where a wooden floor meets with a carpet or ceramic tiles. They are prefinished with a satin lacquer. We recommend this product be installed with Laybond Gripfill Adhesive.
  
• Natura Solid Maple Edge Trim 1m
  Made from solid wood to match your chosen floor. An edge trim is to be used where a wooden floor meets a hearth, patiodoor, front door, back door, or to butt up to a step. It can also be used to create an inset door mat recess. They are prefinished with a satin lacquer. Kahrs and Natura trims may not match each other exactly so we suggest purchasing the same manufacturer for adjoining trims. We recommend this product be installed with Laybond Gripfill Adhesive.
  
• Natura Solid Maple Edge Trim 2m
  Made from solid wood to match your chosen floor. An edge trim is to be used where a wooden floor meets a hearth, patiodoor, front door, back door, or to butt up to a step. It can also be used to create an inset door mat recess. They are prefinished with a satin lacquer. Kahrs and Natura trims may not match each other exactly so we suggest purchasing the same manufacturer for adjoining trims. We recommend this product be installed with Laybond Gripfill Adhesive.
  
• Natura Solid Maple Lacquered Scotia 2m
  Made from solid wood to match your chosen floor, a Scotia is of concave design, used around the edge of the room to hide the expansion gap required when installing wooden flooring. Supplied unfinished and can be left unfinished, or lacquered, oiled or stained depending on personal preference. We recommend this product is installed by pinning in conjunction with Laybond Gripfill Adhesive.
  
• Natura Solid Maple Pipe Cover
  Made from Solid wood to match your chosen floor. Pipe covers are designed to be used around the edge of pipes which go into the floor to hide the expansion gap which is required when installing wooden flooring. Easy-install design in two halves that can be fixed around pipes to hide expansion gap. They are pre-finished with a satin lacquer. We recommend this product be installed by gluing the doweling and leaving the cover laid loosely over the expansion area.
  
• Natura Solid Maple Ramp Trim 1m
  Made from solid wood to match your chosen floor a ramp trim is to be used where a wooden floor reduces down to the level that your new wooden flooring is installed against, e.g. vinyl, floor boards. They are prefinished with a satin lacquer. Kahrs and Natura trims may not match each other exactly so we suggest purchasing the same manufacturer for adjoining trims. We recommend this product be installed with Laybond Gripfill Adhesive.
  
• Natura Solid Maple Ramp Trim 2m
  Made from solid wood to match your chosen floor a ramp trim is to be used where a wooden floor reduces down to the level that your new wooden flooring is installed against, e.g. vinyl, floor boards. They are prefinished with a satin lacquer. Kahrs and Natura trims may not match each other exactly so we suggest purchasing the same manufacturer for adjoining trims. We recommend this product be installed with Laybond Gripfill Adhesive.
  
• Natura Solid Maple Threshold Trim 1m
  Made from solid wood to match your chosen floor. A threshold trim is to be used where a wooden floor meets a floor of the supportable same or similar height, e.g. wood or tiles. These are prefinished with a satin lacquer. Kahrs and Natura trims may not match each other exactly so we suggest purchasing the same manufacturer for adjoining trims. We recommend this product be installed with Laybond Gripfill Adhesive.
  
• Natura Solid Maple Threshold Trim 2m
  Made from solid wood to match your chosen floor. A threshold trim is to be used where a wooden floor meets a floor of the supportable same or similar height, e.g. wood or tiles. These are prefinished with a satin lacquer. Kahrs and Natura trims may not match each other exactly so we suggest purchasing the same manufacturer for adjoining trims. We recommend this product be installed with Laybond Gripfill Adhesive.
  
• Natura Solid Maple Unfinished Scotia 2.4m
  Made from solid wood to match your chosen floor, a Scotia is of concave design, used around the edge of the room to hide the expansion gap required when installing wooden flooring. Supplied unfinished and can be left unfinished, or lacquered, oiled or stained depending on personal preference. We recommend this product is installed by pinning in conjunction with Laybond Gripfill Adhesive.
  
• Natura Solid Merbau Edge Trim 1m
  Made from solid wood to match your chosen floor. An edge trim is to be used where a wooden floor meets a hearth, patiodoor, front door, back door, or to butt up to a step. It can also be used to create an inset door mat recess. They are prefinished with a satin lacquer. Kahrs and Natura trims may not match each other exactly so we suggest purchasing the same manufacturer for adjoining trims. We recommend this product be installed with Laybond Gripfill Adhesive.
  
• Natura Solid Merbau Edge Trim 2m
  Made from solid wood to match your chosen floor. An edge trim is to be used where a wooden floor meets a hearth, patiodoor, front door, back door, or to butt up to a step. It can also be used to create an inset door mat recess. They are prefinished with a satin lacquer. Kahrs and Natura trims may not match each other exactly so we suggest purchasing the same manufacturer for adjoining trims. We recommend this product be installed with Laybond Gripfill Adhesive.
  
• Natura Solid Merbau Ramp Trim 1m
  Made from solid wood to match your chosen floor a ramp trim is to be used where a wooden floor reduces down to the level that your new wooden flooring is installed against, e.g. vinyl, floor boards. They are prefinished with a satin lacquer. Kahrs and Natura trims may not match each other exactly so we suggest purchasing the same manufacturer for adjoining trims. We recommend this product be installed with Laybond Gripfill Adhesive.
  
• Natura Solid Merbau Ramp Trim 2m
  Made from solid wood to match your chosen floor a ramp trim is to be used where a wooden floor reduces down to the level that your new wooden flooring is installed against, e.g. vinyl, floor boards. They are prefinished with a satin lacquer. Kahrs and Natura trims may not match each other exactly so we suggest purchasing the same manufacturer for adjoining trims. We recommend this product be installed with Laybond Gripfill Adhesive.
  
• Natura Solid Oak Angle Edge 2.4m
  Made from solid wood to match your chosen floor. An angle edge is designed to finish off the area on the edge of a step or stair. They are prefinished with a satin lacquer. Kahrs and Natura trims may not match each other exactly so we suggest purchasing the same manufacturer for adjoining trims. We recommend this product be installed with Laybond Gripfill Adhesive.
  
• Natura Solid Oak Carpet Reducer Trim 1m
  Made from solid wood to match your chosen floor a carpet reducer is to be used where a wooden floor meets with a carpet or ceramic tiles. They are prefinished with a satin lacquer. We recommend this product be installed with Laybond Gripfill Adhesive.
  
• Natura Solid Oak Carpet Reducer Trim 2m
  Made from solid wood to match your chosen floor a carpet reducer is to be used where a wooden floor meets with a carpet or ceramic tiles. They are prefinished with a satin lacquer. We recommend this product be installed with Laybond Gripfill Adhesive.
  
• Natura Solid Oak Edge Trim 1m
  Made from solid wood to match your chosen floor. An edge trim is to be used where a wooden floor meets a hearth, patiodoor, front door, back door, or to butt up to a step. It can also be used to create an inset door mat recess. They are prefinished with a satin lacquer. Kahrs and Natura trims may not match each other exactly so we suggest purchasing the same manufacturer for adjoining trims. We recommend this product be installed with Laybond Gripfill Adhesive.
  
• Natura Solid Oak Edge Trim 2m
  Made from solid wood to match your chosen floor. An edge trim is to be used where a wooden floor meets a hearth, patiodoor, front door, back door, or to butt up to a step. It can also be used to create an inset door mat recess. They are prefinished with a satin lacquer. Kahrs and Natura trims may not match each other exactly so we suggest purchasing the same manufacturer for adjoining trims. We recommend this product be installed with Laybond Gripfill Adhesive.
  
• Natura Solid Oak Pipe Cover
  Made from Solid wood to match your chosen floor. Pipe covers are designed to be used around the edge of pipes which go into the floor to hide the expansion gap which is required when installing wooden flooring. Easy-install design in two halves that can be fixed around pipes to hide expansion gap. They are pre-finished with a satin lacquer. We recommend this product be installed by gluing the doweling and leaving the cover laid loosely over the expansion area.
  
• Natura Solid Oak Prefinished Scotia 2m
  Made from solid wood to match your chosen floor, a Scotia is of concave design, used around the edge of the room to hide the expansion gap required when installing wooden flooring. We recommend this product is installed by pinning in conjunction with Laybond Gripfill Adhesive.
  
• Natura Solid Oak Ramp Trim 1m
  Made from solid wood to match your chosen floor a ramp trim is to be used where a wooden floor reduces down to the level that your new wooden flooring is installed against, e.g. vinyl, floor boards. They are prefinished with a satin lacquer. Kahrs and Natura trims may not match each other exactly so we suggest purchasing the same manufacturer for adjoining trims. We recommend this product be installed with Laybond Gripfill Adhesive.
  
• Natura Solid Oak Ramp Trim 1m
  Made from solid wood to match your chosen floor a ramp trim is to be used where a wooden floor reduces down to the level that your new wooden flooring is installed against, e.g. vinyl, floor boards. They are prefinished with a satin lacquer. Kahrs and Natura trims may not match each other exactly so we suggest purchasing the same manufacturer for adjoining trims. We recommend this product be installed with Laybond Gripfill Adhesive.
  
• Natura Solid Oak Ramp Trim 2m
  Made from solid wood to match your chosen floor a ramp trim is to be used where a wooden floor reduces down to the level that your new wooden flooring is installed against, e.g. vinyl, floor boards. They are prefinished with a satin lacquer. Kahrs and Natura trims may not match each other exactly so we suggest purchasing the same manufacturer for adjoining trims. We recommend this product be installed with Laybond Gripfill Adhesive.
  
• Natura Solid Oak Stairnosing 1m
  Made from solid wood to match your chosen floor. A stair-nosing is designed to finish off the area on the edge of a step or stair. They are prefinished with a satin lacquer. Kahrs and Natura trims may not match each other exactly so we suggest purchasing the same manufacturer for adjoining trims. We recommend this product be installed with Laybond Gripfill Adhesive.
  
• Natura Solid Oak Stairnosing 2m
  Made from solid wood to match your chosen floor. A stair-nosing is designed to finish off the area on the edge of a step or stair. They are prefinished with a satin lacquer. Kahrs and Natura trims may not match each other exactly so we suggest purchasing the same manufacturer for adjoining trims. We recommend this product be installed with Laybond Gripfill Adhesive.
  
• Natura Solid Oak Threshold Trim 1m
  Made from solid wood to match your chosen floor. A threshold trim is to be used where a wooden floor meets a floor of the supportable same or similar height, e.g. wood or tiles. These are prefinished with a satin lacquer. Kahrs and Natura trims may not match each other exactly so we suggest purchasing the same manufacturer for adjoining trims. We recommend this product be installed with Laybond Gripfill Adhesive.
  
• Natura Solid Oak Threshold Trim 2m
  Made from solid wood to match your chosen floor. A threshold trim is to be used where a wooden floor meets a floor of the supportable same or similar height, e.g. wood or tiles. These are prefinished with a satin lacquer. Kahrs and Natura trims may not match each other exactly so we suggest purchasing the same manufacturer for adjoining trims. We recommend this product be installed with Laybond Gripfill Adhesive.
  
• Natura Solid Oak Unfinished Skirting 150mm x 2.4m
  Natura skirting is sold unfinished, therefore would need finishing on-site with an oil, lacquer or stain of your choice. It is made from heartwood or sapwood with variable grain patterns. Unlimited colour variation, mineral streaks, filled knots and limited knotholes are allowed. We recommend this product be installed with Laybond Gripfill Adhesive.
  
• Natura Solid Walnut Angle Edge 2.4m
  Made from solid wood to match your chosen floor. An angle edge is designed to finish off the area on the edge of a step or stair. They are prefinished with a satin lacquer. Kahrs and Natura trims may not match each other exactly so we suggest purchasing the same manufacturer for adjoining trims. We recommend this product be installed with Laybond Gripfill Adhesive.
  
• Natura Solid Walnut Carpet Reducer Trim 1m
  Made from solid wood to match your chosen floor a carpet reducer is to be used where a wooden floor meets with a carpet or ceramic tiles. They are prefinished with a satin lacquer. We recommend this product be installed with Laybond Gripfill Adhesive.
  
• Natura Solid Walnut Carpet Reducer Trim 2m
  Made from solid wood to match your chosen floor a carpet reducer is to be used where a wooden floor meets with a carpet or ceramic tiles. They are prefinished with a satin lacquer. We recommend this product be installed with Laybond Gripfill Adhesive.
  
• Natura Solid Walnut Edge Trim 1m
  Made from solid wood to match your chosen floor. An edge trim is to be used where a wooden floor meets a hearth, patiodoor, front door, back door, or to butt up to a step. It can also be used to create an inset door mat recess. They are prefinished with a satin lacquer. Kahrs and Natura trims may not match each other exactly so we suggest purchasing the same manufacturer for adjoining trims. We recommend this product be installed with Laybond Gripfill Adhesive.
  
• Natura Solid Walnut Edge Trim 2m
  Made from solid wood to match your chosen floor. An edge trim is to be used where a wooden floor meets a hearth, patiodoor, front door, back door, or to butt up to a step. It can also be used to create an inset door mat recess. They are prefinished with a satin lacquer. Kahrs and Natura trims may not match each other exactly so we suggest purchasing the same manufacturer for adjoining trims. We recommend this product be installed with Laybond Gripfill Adhesive.
  
• Natura Solid Walnut Lacquered Scotia 2m
  Made from solid wood to match your chosen floor, a Scotia is of concave design, used around the edge of the room to hide the expansion gap required when installing wooden flooring. We recommend this product is installed by pinning in conjunction with Laybond Gripfill Adhesive.
  
• Natura Solid Walnut Pipe Cover
  Made from Solid wood to match your chosen floor. Pipe covers are designed to be used around the edge of pipes which go into the floor to hide the expansion gap which is required when installing wooden flooring. Easy-install design in two halves that can be fixed around pipes to hide expansion gap. They are pre-finished with a satin lacquer. We recommend this product be installed by gluing the doweling and leaving the cover laid loosely over the expansion area.
  
• Natura Solid Walnut Ramp Trim 1m
  Made from solid wood to match your chosen floor a ramp trim is to be used where a wooden floor reduces down to the level that your new wooden flooring is installed against, e.g. vinyl, floor boards. They are prefinished with a satin lacquer. Kahrs and Natura trims may not match each other exactly so we suggest purchasing the same manufacturer for adjoining trims. We recommend this product be installed with Laybond Gripfill Adhesive.
  
• Natura Solid Walnut Ramp Trim 2m
  Made from solid wood to match your chosen floor a ramp trim is to be used where a wooden floor reduces down to the level that your new wooden flooring is installed against, e.g. vinyl, floor boards. They are prefinished with a satin lacquer. Kahrs and Natura trims may not match each other exactly so we suggest purchasing the same manufacturer for adjoining trims. We recommend this product be installed with Laybond Gripfill Adhesive.
  
• Natura Solid Walnut Threshold Trim 1m
  Made from solid wood to match your chosen floor. A threshold trim is to be used where a wooden floor meets a floor of the supportable same or similar height, e.g. wood or tiles. These are prefinished with a satin lacquer. Kahrs and Natura trims may not match each other exactly so we suggest purchasing the same manufacturer for adjoining trims. We recommend this product be installed with Laybond Gripfill Adhesive.
  
• Natura Solid Walnut Threshold Trim 2m
  Made from solid wood to match your chosen floor. A threshold trim is to be used where a wooden floor meets a floor of the supportable same or similar height, e.g. wood or tiles. These are prefinished with a satin lacquer. Kahrs and Natura trims may not match each other exactly so we suggest purchasing the same manufacturer for adjoining trims. We recommend this product be installed with Laybond Gripfill Adhesive.
  
• Natura Solid Wood Unfinished Skirting 2.4m
  Natura skirting is sold unfinished, therefore would need finishing on-site with an oil, lacquer or stain of your choice. It is made from solid pine heartwood and sapwood with variable grain patterns. Unlimited colour variation, mineral streaks, filled knots and limited knotholes are allowed. We recommend this product be installed with Laybond Gripfill Adhesive.
  
• Natura Threshold Bar Gold
  A threshold trim is to be used where a laminate floor meets a floor of the supportable same or similar height, e.g. carpet, wood or tiles. Supplied in Gold colour for a modern finish.
  
• Natura Threshold Bar Sand
  A threshold trim is to be used where a laminate floor meets a floor of the supportable same or similar height, e.g. carpet, wood or tiles. Supplied in Sand colour for a modern finish.
  
• Natura Threshold Bar Silver
  A threshold trim is to be used where a laminate floor meets a floor of the supportable same or similar height, e.g. carpet, wood or tiles. Supplied in Silver colour for a modern finish.
  
• Natura Threshold Bar Stainless Steel
  A threshold trim is to be used where a laminate floor meets a floor of the supportable same or similar height, e.g. carpet, wood or tiles. Supplied in Stainless Steel colour for a modern finish.
  
• Natura Walnut Scotia
  Natura scotia is of concave design, used around the edge of the room to hide the expansion gap required when installing laminate flooring. Supplied to match your chosen laminate in the closest match possible. Product colour may differ from that shown in the picture – please check before ordering.
  
• Natura Walnut Threshold 1m
  A threshold trim is to be used where a laminate floor meets a floor of the supportable same or similar height, e.g. carpet, wood or tiles. Please note: these trims are the closest match available as there are no specific trims to match the floor colour. Product colour may differ from that shown in the picture – please check before ordering.
  
• Natural Flooring Care Kit
  This kit contains the the products needed to clean a floor from the Natura carpet range.
  
• Paper Felt Underlay
  Paper underlay to be used with under-floor heating; can be used with Damp Proof Membrane Screen if you are laying onto a concrete floor.
  
• Quickstep All For One Glue
  This Quick-Step multifunctional glue is suitable for affixing skirting-boards and stair bases, and any other trims you may have to fix down.
  
• Quickstep Antique Oak Laminate Incizo Profile
  The Quickstep multifunctional profile with Incizo technology provides a simple solution for a perfect finish to your floor. You can use the profile in five ways: (1) as an expansion profile; (2) as a transition profile; (3) as an end profile; (4) as a profile for transition to carpet and (5) as a stair nose, by using a base plate purchased separately. Supplied to match Quickstep Antique Oak laminate flooring.
  
• Quickstep Antique Oak Laminate Scotia
  Quickstep scotia is of concave design, used around the edge of the room to hide the expansion gap required when installing laminate flooring. Supplied to match Quickstep Antique Oak laminate flooring.
  
• Quickstep Clean Spray
  This cleaner effortlessly and hygienically cleans and maintains your Quick-Step floor. The cleaner prevents stubborn soiling and stains. The Quick-Step cleaner emphasises the properties and character of the floor while enhancing the luster.
  
• Quickstep Cleaning Kit
  Comes with an easily adjustable handle, washable microfibre cloth and handy spray. To be used for slightly damp or dry maintenance. Extremely handy. The Quick-Step® clean mop and clean spray are also available individually.
  
• Quickstep Clips for High Skirting
  50 Clips per pack to be used for glueless and screwless installation of skirting. One pack covers approximately 10 lengths of skirting
  
• Quickstep Clips for Standard Skirting
  50 Clips per pack to be used for glueless and screwless installation of skirting. One pack covers approximately 10 lengths of skirting
  
• Quickstep Combifloor Plus Underlay
  Everything you need in one quality underlay. This unique, three-in-one product offers improved sound-absorption, moisture protection and embossed self-levelling. It reduces hollow tapping noises, producing a sound that is very close to actual hardwood - and transmits less sound to adjacent rooms and rooms below. The pre-attached moisture barrier helps protect floor from moisture damage. This underlay is non-allergenic for a more comfortable home and is resistant to mould, mildew and bacteria growth. Easy to install with attached overlapping lip and tape and safe for underfloor heating, this underlay meets Quickstep warranty requirements.
  
• Quickstep Combifloor Plus Underlay
  Everything you need in one quality underlay. This unique, three-in-one product offers improved sound-absorption, moisture protection and embossed self-levelling. It reduces hollow tapping noises, producing a sound that is very close to actual hardwood - and transmits less sound to adjacent rooms and rooms below. The pre-attached moisture barrier helps protect floor from moisture damage. This underlay is non-allergenic for a more comfortable home and is resistant to mould, mildew and bacteria growth. Easy to install with attached overlapping lip and tape and safe for underfloor heating, this underlay meets Quickstep warranty requirements.
  
• Quickstep Damp Proof Membrane Screen
  To be used to stop moisture rising from a concrete sub-floor which in turn could ruin your new floor covering. This is often referred to as a “DPM”. Most foam underlays incorporate a DPM. It is also used in conjunction with under-floor heating systems, along with paper felt underlay.
  
• Quickstep Doormat
  With the QuickStep doormat at the entrance of your home. you can avoid unnecessary damage to you floor. The scraping zone of the mat loosens the dirt. Coarse dirt such as grit is already removed from shoes in this zone. The brushing zone removes all fine dirt (e.g. sand) which has been loosened in the scraping zone. The drying zone helps remove any moisture.
  
• Quickstep Force
  Stubborn stains (permanent marker, shoe polish, etc.) are removed in no time with Quick-Step Force. Worth ordering at the same time as your floor, just in case!
  
• Quickstep Harvest Oak Laminate Incizo Profile
  The Quickstep multifunctional profile with Incizo technology provides a simple solution for a perfect finish to your floor. You can use the profile in five ways: (1) as an expansion profile; (2) as a transition profile; (3) as an end profile; (4) as a profile for transition to carpet and (5) as a stair nose, by using a base plate purchased separately. Supplied to match Quickstep Harvest Oak laminate flooring.
  
• Quickstep Harvest Oak Laminate Scotia
  Quickstep scotia is of concave design, used around the edge of the room to hide the expansion gap required when installing laminate flooring. Supplied to match Quickstep Harvest Oak laminate flooring.
  
• Quickstep Incizo Stair Base
  An aluminium sub-profile to be used on the edge of a step or stairs, used in conjunction with Quickstep Incizo profile. For more information on installing this trim click here.
  
• Quickstep Installation Kit
  This kit includes 10mm spacers a pulling bar and a knocking block. This is essential if you are installing your first floor.
  
• Quickstep Laminate Foam Underlay
  Quickstep underlay must be used to comply with the Quickstep Warranty.
  
• Quickstep Laminate High Skirting
  Laminate Skirting designed to complement the Quickstep Flooring. Colour will match laminate flooring ordered (unless requested otherwise). You can stick the skirting to the wall, or use Quickstep skirting clips, which are best installed while fitting the floor, as opposed to once the floor is laid.
  
• Quickstep Laminate Incizo Profile
  The Quickstep multifunctional profile with Incizo technology provides a simple solution for a perfect finish to your floor. You can use the profile in five ways: (1) as an expansion profile; (2) as a transition profile; (3) as an end profile; (4) as a profile for transition to carpet and (5) as a stair nose, by using a base plate purchased separately. Available in all Quickstep designs.
  
• Quickstep Laminate Scotia
  Quickstep scotia is of concave design, used around the edge of the room to hide the expansion gap required when installing wooden flooring. Supplied to match your chosen laminate in the closest match possible.
  
• Quickstep Laminate Skirting
  Laminate Skirting designed to complement the Quickstep Flooring. Colour will match laminate flooring ordered (unless requested otherwise). You can stick the skirting to the wall, or use Quickstep skirting clips, which are best installed while fitting the floor, as opposed to once the floor is laid.
  
• Quickstep Mix and Fix
  For the repair of minor scratches in your laminate floor. You can easily make up the colour of your floor so you cannot see the difference against the rest of your floor.
  
• Quickstep Natural Oak Laminate Incizo Profile
  The Quickstep multifunctional profile with Incizo technology provides a simple solution for a perfect finish to your floor. You can use the profile in five ways: (1) as an expansion profile; (2) as a transition profile; (3) as an end profile; (4) as a profile for transition to carpet and (5) as a stair nose, by using a base plate purchased separately. Supplied to match Quickstep Natural Oak laminate flooring.
  
• Quickstep Natural Oak Laminate Scotia
  Quickstep scotia is of concave design, used around the edge of the room to hide the expansion gap required when installing laminate flooring. Supplied to match Quickstep Natural Oak laminate flooring.
  
• Quickstep Oiled Walnut Laminate Incizo Profile
  The Quickstep multifunctional profile with Incizo technology provides a simple solution for a perfect finish to your floor. You can use the profile in five ways: (1) as an expansion profile; (2) as a transition profile; (3) as an end profile; (4) as a profile for transition to carpet and (5) as a stair nose, by using a base plate purchased separately. Supplied to match Quickstep Oiled Walnut laminate flooring.
  
• Quickstep Oiled Walnut Laminate Scotia
  Quickstep scotia is of concave design, used around the edge of the room to hide the expansion gap required when installing laminate flooring. Supplied to match Quickstep Oiled Walnut laminate flooring.
  
• Quickstep Parquet Skirting
  The new patented Parquet skirting-board is already a classic. The sober line of this skirting-board embodies the dependability a plank floor demands. The fine finish ensures a harmonious match with the colour and structure of your floor. There is no better combination.
  
• Quickstep Parquet Skirting for Largo floors
  The new patented Parquet skirting-board is already a classic. The sober line of this skirting-board embodies the dependability a plank floor demands. The fine finish ensures a harmonious match with the colour and structure of your floor. There is no better combination. This skirting is ideal for use with Quickstep Largo floors.
  
• Quickstep Parquet Skirting Track
  This can be used in conjunction with the Quickstep Parquet Skirting.
  
• Quickstep Pipe Covers
  Pipe covers are designed to be used around the edge of pipes which go into the floor to hide the expansion gap which is required when installing laminate flooring. Easy-install design with a join that can be fixed around pipes to hide expansion gap. They are supplied as a pair so you would need one pack per radiator. These pipe covers are supplied in a matching or in very few cases similar colour to the laminate floor.
  
• Quickstep Prato Laminate Incizo Profile
  The Quickstep multifunctional profile with Incizo technology provides a simple solution for a perfect finish to your floor. You can use the profile in five ways: (1) as an expansion profile; (2) as a transition profile; (3) as an end profile; (4) as a profile for transition to carpet and (5) as a stair nose, by using a base plate purchased separately. Supplied to match Quickstep Prato laminate flooring.
  
• Quickstep Prato Laminate Scotia
  Quickstep scotia is of concave design, used around the edge of the room to hide the expansion gap required when installing laminate flooring. Supplied to match Quickstep Prato laminate flooring.
  
• Quickstep Seal and Click
  Quickstep Seal and Click has been especially developed to provide prolonged protection for Quickstep Lagune against moisture when being laid in bathrooms. its is elastic, transparent, does not stick and gives further protection against water. Apply Quickstep Seal and Click to the short joints only to help comply with the 10 year bathroom guarantee.
  
• Quickstep Sealant Kit
  Quick-Step Kit is an acrylic-based elastic paste that can be used to fill any gaps that may remain including any expansion joints. Available in various colours for a matching finish.
  
• Quickstep Softboard
  This underfloor is produced from stable wood fibres. It levels out the unevenness in the base-floor. Perfect for installation over wooden subfloors. It also offers sound reduction in transit sound. This underlay does not have a damp proof membrane. Not suitable for underfloor heating.
  
• Quickstep Tenon Saw
  This super handy Quick-Step® saw will help you saw door frames correctly, so that your floor will fit perfectly underneath. The saw blade is made of top-class steel and has an adjustable handle.
  
• Quickstep Tramonto Laminate Incizo Profile
  The Quickstep multifunctional profile with Incizo technology provides a simple solution for a perfect finish to your floor. You can use the profile in five ways: (1) as an expansion profile; (2) as a transition profile; (3) as an end profile; (4) as a profile for transition to carpet and (5) as a stair nose, by using a base plate purchased separately. Supplied to match Quickstep Tramonto laminate flooring.
  
• Quickstep Tramonto Laminate Scotia
  Quickstep scotia is of concave design, used around the edge of the room to hide the expansion gap required when installing laminate flooring. Supplied to match Quickstep Tramonto laminate flooring.
  
• Quickstep Transit Sound Ultra Underlay
  Quickstep Transitsound Ultra this unbeatable and unique sound absorbing underfloor has been specially designed to reduce transit sound, which is sound that can be heard in the room below. This underlay offers a guaranteed 21dB reduction in transit sound
  
• Quickstep Unisound Combiflor Underlay
  When you won’t settle for anything but the best. Our premium solution offers unbeatable sound, an extra-thick moisture barrier and a self-levelling effect. Its the best at reducing hollow tapping noises, producing a sound that is very close to actual hardwood - and transmits less sound to adjacent rooms and rooms below. The extra-thick, pre-attached moisture barrier helps protect floor from moisture damage. This underlay is non-allergenic for a more comfortable home and is resistant to mould, mildew and bacteria growth. Easy to install with attached overlapping lip and tape and safe for underfloor heating, this underlay meets Quickstep warranty requirements.
  
• Soft Step 10mm Underlay
  SoftStep 10mm PU foam carpet underlay has a luxurious rating and is ideal for use in domestic use areas where a high degree of comfort is required and offers excellent durability & protection for any carpet.
  
• Soft Step 8mm Underlay
  SoftStep 8mm PU foam carpet underlay has a comfort rating and is ideal for use in domestic use areas where a good degree of comfort is required and offers reasonable durability & protection for any carpet.
  
• Solid Wood Castor Cups
  These solid wood castor cups are made from solid wood and designed to be used under sofas, tables and all types of furniture to protect your new floor.
  
• Spacia Easyfit Antiplas Tape
  Tape to be used with Spacia Easyfit flooring. This is a double sided adhesive tape essential for installation of the Spacia Easyfit. Covers approximately 15m2 per roll.
  
• Tuplex Underlay
  Tuplex is made out of two layers of solid polyethylene with flexible polystyrene granules between the layers and recommended by Kahrs, but is suitable to support any engineered wooden floor floating system. It comes with a built in Damp Proof Membrane which is a requirement for concrete sub-floors. Suitable for all areas of the home, including ground floor, basements, and 1st floor environments. This product is not designed to be used as an acoustic underlay.