Kahrs Flooring - now with FREE underlay!!

Construction:

• The multi-layer UV Cured Acrylic Urethane finish is factory applied. It is ready to be walked on as soon as the Kahrs floor is installed. The finish is very easy to maintain and resists most common staining elements in testing done over 24 hrs.
• approx 3.6mm thick real wood veneer, this wear-layer can be sanded several times and will last for decades.
• The middle core of quarter-sawn pine fingers guarantees a lifetime of stability and shape retention.
• A backing layer of spruce contributes to the floor's stability. The cross-directional fibres minimise the movements arising from seasonal change.

Advantages:

• Stable shape because of the climate-controlled production processes
• Kahrs Patented Woodloc system
• Hardwood at the short ends make joints even stronger
• Available for every taste in more than 40 patterns and types of wood
• 30 year domestic warranty
• Easy to clean
• Can be relacquered or oiled over time

Wear Surface:

The top layer of Kahrs flooring is approx 3.6mm thick and is available in many species. This wear-layer can be sanded several times and will last for decades. Kahrs offer a 30 year warranty on the durability of the wear layer.

Installation:

Kahrs wood flooring is installed floating. The planks are installed loose on the sub-floor and linked together with Kahrs Woodloc. Make an allowance for approximately 5% waste when installing. An underlay must be used when installing Kahrs flooring, and a Damp Proof Membrane is required for concrete subfloors. For more detailed information on installation, please visit the Installation page below.

Maintenance:

Vacuum clean or wipe the floor as required with a damp cloth that has been thoroughly wrung out or use Kahrs Original maintenance mop. Too much water can damage the floor. For more detailed information on maintenance, please visit the Tips & Ideas page below.